Easy Solutions to Common Audi A4 Splash Shield Issues
Is your Audi A4 experiencing premature degradation? If your answer is yes, then you should install a splash shield. Attached under your vehicle, this shield serves to protect your vehicle from road salt, debris, and other corrosive elements. However, although it is built to last for a long time, this shield can still cause problems especially if it is not maintained properly. Read on to know some of the most common issues that you may encounter with your A4's splash shield.
Dull-looking splash shields
Over time, the splash shields of your Audi A4 will look dull because of road debris and other corrosive elements. Once this happens, your vehicle will look old and unappealing. As a solution, you can try restoring your splash shields by painting them. However, make sure that the paint you are going to use is designed to adhere well to the material of your shields. Also, don't forget to sand the splash shields before painting them to remove dirt and make them smooth again. If you want to fully customize the shields, you can try using stencils to paint different shapes. Just don't forget to wait for a week before reinstalling the splash shields.
Stubborn stains and spots
Because your Audi A4 splash shield is designed to protect your vehicle from premature degradation that can be caused by road salt and other corrosive elements, it's only natural that it will become dirty over time. However, the accumulated dirt and will be very difficult to remove especially if you don't have the right cleaning solution. To effectively remove splash shield stains, you need to use a tar remover that can be purchased from an auto parts store. Just be careful when applying this stain remover because it can damage your vehicle's paint job.
Another problem that you may encounter with your A4's splash shield is having loose sections. Once this happens, your vehicle will not receive the best protection. What's more, you may hear ratting noises under your vehicle because the loose section of the shield is hitting other parts of your vehicle. To solve this, you need to tighten the bolts or screws that are holding the splash shield in place. In case it is secured through clips, then you need to replace the clips if they are missing.