Chevrolet C1500 Weatherstrip Seal
Helpful Tips in Cleaning Your Chevrolet C1500 Weatherstrip Seal
Your Chevrolet C1500 weatherstrip seals are made from rubber and are located on different areas in your vehicle. The most common areas include your doors and windows, which are prone to dirt that comes from the outside. Thus, your weatherstrip seals serve as interior protection against harmful elements. Because of this, you must maintain these seals in order to prolong their usage. Check out these helpful tips in keeping your Chevrolet C1500 weatherstrip seals clean and damage-free:
- Use a vinyl cleaner and an anti-UV sealant on your weatherstrip seals.
Your weatherstrip seals have rubber components that are prone to damage if not properly maintained. It is recommended to use a vinyl cleaner, which is a mild substance for preventing cracks and pores from building up. Avoid using cleaning substances that are oil-based because it can damage the rubber. In addition, you must wash your weatherstrip seals with a mixture of soap and water. The same cleaning materials should be used on the door seals of your vehicle. Once you have finished washing, you may apply a wax solvent or anti-UV sealant for additional shine and protection.
- Clean the mounting frames of your weatherstrip seals as well.
The mounting frames of your weatherstrip seals should also be cleaned. Thus, you must remove your weatherstrip seals from your vehicle's doors and windows. Since they are bonded with adhesive, you may apply additional amounts in every frame. In this way, you can ensure that your weatherstrip seals can still be attached securely. Wipe the excess adhesive afterwards using your cleaning materials.
- Cover the leaking or torn areas of your weatherstrip seals immediately.
Check for worn out sections of your weatherstrip seals before they start to damage your vehicle's interior. Broken weatherstrip seals can allow rainwater to enter your vehicle, which can be the cause of unwanted leaks. Thus, you must apply adhesive on the affected sections. If your weatherstrip seals are already torn, you can use foam rods that can fill the gaps in your seals.