Chevrolet Colorado Nerf Bars
Tips to Extend the Life of Your Chevrolet Colorado Nerf Bars
Extra convenience and protection—these are what your Chevrolet Colorado nerf bars can offer you. They provide an easier access for the passengers to go in and out of your vehicle's cabin. Moreover, your nerf bars also help in deflecting different road elements that may hit your vehicle's frame. Although they are toughly made, your nerf bars can also get damaged over time. Hence, you must have the habit of maintaining your Chevrolet Colorado nerf bars at all times. Here are some tips for you:
- Wash and wipe your nerf bars with the appropriate cleaners to avoid any damage.
Your nerf bars can accumulate a huge amount of dirt. Hence, you must wash them with a mixture of mild car soap and clean water. The mixture is effective enough for the nerf bars to be cleaned thoroughly without having to worry regarding possible abrasions. In addition, a microfiber towel can help in wiping the nerf bars, so that the inner areas can also be reached. This towel is very smooth, so scratches can be prevented. It is also a good absorbent of dirt and moisture.
- Use the right cleaning items and products to make your nerf bars free from rust.
Nerf bars can get easily corroded since they are constantly exposed on different road elements. If you see rust forming on your nerf bars, you must remove them immediately. For this matter, you must use a wire brush to scrub the rust off the surface. A naval jelly can also help in breaking down tough rust that cannot be eliminated by simply scrubbing.
- Apply the right polishing compound that can enhance the quality of your nerf bars.
Washing may remove the dirt from your nerf bars, but it is not enough to retain or even enhance the look of your nerf bars. Hence, you may apply a polishing compound that is suitable to the type of your nerf bars. For instance, you must apply a chrome polish for chrome nerf bars. If you have aluminum nerf bars, then you must use a polish intended for aluminum surfaces. However, you must never blend wax with the polishing compound to prevent your nerf bars from being slippery.