Chevrolet Corvette Brake Disc
Three Tips to Keep Your Chevrolet Corvette Brake Disc in Top Condition
Efficient and tough—these are the words that can best describe your Chevrolet Corvette brake disc. It is an essential component of the braking system in which the brake pads press against its flat surface to help in stopping your vehicle safely. It withstands the huge amount of heat brought by the braking process. However, it can be prone to overheating once it becomes abused with excessive heat. Thus, you must maintain your Chevrolet Corvette brake disc at all times. Here are some tips that you can follow:
- Set a schedule to replace the brake fluid to maintain the smooth function of your brake disc.
You must set a schedule for inspecting and replacing the brake fluid. This is because this fluid can be mixed with excess moisture and dirt particles over time. Because the force of the brake fluid is needed to keep the operations of the braking system, your brake disc can be affected once it gets contaminated. Hence, you must replace the fluid at least once every year to prevent your brake disc from having grooves that may damage it.
- Use a clean rag and wire brush to remove rust on the surrounding areas of your brake disc.
Because of the contact made by your brake disc with the brake pads, the surface rust on it can be easily removed by the process. However, you must still inspect for its surrounding areas for signs of corrosion because rust can quickly spread and damage your brake disc. For this matter, you can use a clean and smooth rag to wipe the excess particles from the surface rust once your brake disc is removed. In addition, you can use a wire brush in the hub of your brake disc to remove rust that settled in that area, which cannot be cleaned automatically during the braking process.
- Have your brake disc resurfaced if needed to prevent brake pulsations.
Inspect your brake disc and have it resurfaced by your trusted mechanic if needed. A misconception about resurfacing is that it makes the metal of your brake disc thinner. But in fact, this process just prevents your brake disc from having run-out or the situation in which it deviates from its position and starts to get loose. Resurfacing your brake disc can also prevent pulsation or vibration every time you step on the brake pedal. Hence, you must set a schedule for inspection and consult your mechanic as much as possible.