Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Chevrolet Impala Radiator

Cooling It Down with This Chevrolet Impala Radiator Care Guide

Overheating engine would surely give any driver a headache, especially when it happens while you are driving on a highway. Your vehicle's engine overheats due to a defective radiator. This is mainly because your Chevrolet Impala radiator takes charge of cooling the engine system. In order to do this, you need to give your radiators proper care and maintenance through the following tips:

  • Flush the engine radiator to remove sediments.

Continued use of your car can lead to sediment buildup inside the engine radiator. This sludge blocks proper coolant flow, resulting in reduced engine performance and poor gas mileage. Flushing the radiator helps remove the sediments that cause the blockage. Make sure you prepare a drainage pan to catch the flushed radiator fluid. The whole flushing process can be messy, so it's best to perform it outside, where cleaning can be easier. You might also need to hose the radiator. This is due to the fact that flushing it can only remove 40-50 percent of the old coolant.

  • Use only distilled water and premium-quality coolant.

Distilled water doesn't come with contaminants found in tap water; that is why it's highly recommended to be used in engine radiators. Keep in mind that you must maintain a proper mix of coolant and water in order for the radiator to function effectively. The ideal ratio between the coolant and the distilled water is about 50/50, and it's crucial that you maintain it at this ratio. However, some vehicles may require a different coolant-to-water ratio. It's still best that you consult with your owner's manual or the nearest service center for the right concentration level.

  • Check the radiator for leaks.

Always make it a point to check on your radiator for signs of leakage. Some leaks may be caused by faulty radiators, while some may be due to damaged radiator hoses and other parts of the cooling system. One way to check for leaks is to assess your car's water consumption. If it's consuming too much water or coolant, then it's a sure indication of a radiator leak. Once confirmed, repairing the radiator immediately would save you from bigger problems in the system.

Chevrolet Impala Radiator Bestsellers View more

  • Get Insights on Detecting a Spent Chevrolet Impala Radiator

    Your car's radiator can fail due to various reasons. When this happens, you know you're in trouble, as the radiator plays a huge role in your vehicle's engine system. That is why it takes a responsible driver to detect and fix car radiator problems as soon as they arise. To help you diagnose what's bothering your Chevrolet Impala radiator, here are a few symptoms of a damaged one:

    Excessive coolant consumption

    One sure way to tell if your radiator has gone bad is to observe the coolant flow in the engine. If you find the vehicle to be consuming more coolant or water than usual, then it's time to pop-up the hood and check your radiator. The restriction of coolant flow in the car's engine and cooling system can usually be traced from sediment buildup in the small tubes of the radiator. When this occurs, your vehicle's radiator may fail to give proper cooling to the engine, leading to overheating. Radiator failure also gives your car a reduced performance.


    Checking on your car's radiator and cooling system allows you to tackle problems during its early stages. This way, you still have the chance to stop the damage from spreading. So during your regular car checkup, look for signs of rusting on the radiator's body. If neglected, rust can eat up your radiator's body, resulting in leaks and fluid contamination. You wouldn't want to risk driving with a damaged radiator as this can lead to accidents caused by engine malfunction. Remember that the engine relies on the radiator for its cooling system. Without it, the engine can ruin itself due to the immense heat it produces during combustion.

    Sudden plunge in pressure

    It's easy to notice a drop in pressure when your car radiator has succumbed to corrosion. Usually, the radiator produces pressure ranging from 10 PSI to 12 PSI. Having lower levels of pressure would indicate that the radiator has gone bad. To verify the change in PSI, you can place a pressure gauge on top of the radiator cap, and measure the pressure while the engine is running.