Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Chevrolet K10 Carpet Kit

How to Make Your Chevrolet K10 Carpet Kit Stay Fresh and New

Your Chevrolet K10 carpet kit basically keeps you comfy while protecting the metal flooring of your truck from friction and oxidation as well as keeping wires above the truck's floor hidden from plain sight. A carpet kit is probably one of the automotive parts that are most often overlooked. However, you should keep in mind that maintaining the striking looks of your Chevrolet K10 means that you need to keep it looking good inside and out. Taking good care of your pickup truck's carpet kit ensures better interior appearance and ride comfort. Here are some ways on how you can go about the task of keeping your carpet looking and smelling fresh and new:

  • Suck up the dirt.

From food crumbs to long-lost coins—you might be surprised by what you'll find hidden under the nooks and crannies of your Chevrolet. Small particles of dust and dirt are what you should be wary of as these tend to settle in between the weaves of the carpet kit. Getting rid of small particles shouldn't be a pain in the neck. Simply use a vacuum to clean it off your truck's carpet. Remember to brush it up before starting this task to loosen up dirt and debris that got stuck in its surface. Exert some extra effort to reach concealed areas of your interior because this is where most of the dirt is usually found.

  • Tend to stains and bad odors as soon as you can.

Food spills, mud, ink, and blood—there are myriad things that can stain your Chevrolet K10 carpet kit. Avoiding stains or bad odors is nearly impossible and the best thing you can do is to remove it before it becomes a permanent matter in your interior. There are a lot of carpet cleaners available nowadays that will help you restore problem areas back into its original state and make your whole interior smell like new.

  • Don't drench your carpet.

Don't make the mistake of drenching your entire carpet kit when washing it. The last thing you want is is for your carpet to become a breeding ground of fungi. To avoid mold and mildew, work on small areas at a time. You should also give your carpet kit ample time to dry before putting it to use again.

Chevrolet K10 Carpet Kit Bestsellers View more

  • Three Important Things You Should Remember to Make Your Chevrolet K10 Carpet Kit Installation Easier

    Your Chevrolet K10 carpet kit keeps your feet from touching the cold metal flooring of your truck, effectively ensuring ride comfort. Aside from this, it's also vital for the interior's overall looks. This is why it's important that you replace your carpet kit once it starts looking neglected, frayed, or filthy. Carpet kit installation may get quite a bit tricky and may even take you a few hours to complete. So, check out some of these tips to make this whole process a lot less complicated:

    Tip #1: Give the new carpet kit ample time to unfold and regain its original shape.

    You probably received your new carpet kit packaged inside a box. There's a high chance that it has lost its original molded shape because of being folded or rolled just to fit its packaging. Take it out of the box and lay it over a flat warm surface for a few hours. You can also try to push its contours back to form using your hands. Doing this will let your carpet kit regain its original shape, making it easier for you to fit it over the curves and bends of your interior.

    Tip #2: Remove the old carpet but don't discard it yet.

    Removing your old carpeting is obviously one of the most important steps of your new carpet kit installation. Make sure you do this carefully because you can still use it as a template for measuring the new carpet and identifying where holes and trims should be made. Before you try pulling it off, you need to remove some interior components first including the front and back seats, center consoles, sill plates, and seat belt anchors. After you've removed every part that will hinder the installation, pull the old carpet carefully off your trucks flooring. Take your time doing this task to avoid damaging any part.

    Tip #3: Double-check all measurements before making cuts.

    Cutting holes and trimming excess parts of your new carpet kit should only be done when you're entirely sure of the measurements that you've taken. Keep in mind that the manufacturer won't be accepting it for a return if you have already made incorrect cut-outs, so be careful. If you used the old carpet as a template to mark cut-outs, you can lay it over the flooring of your truck to see if everything is in the right place.