Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Chevrolet Malibu Brake Disc and Pad Kit

Tips to Extend the Optimum Capacity of Your Chevrolet Malibu Brake Disc and Pad Kit

If there is a powerful tandem in your vehicle, that would definitely be your Chevrolet Malibu brake disc and pad kit. The brake disc and pads work together by making contact with each other to produce a force that slows down and stops your vehicle smoothly. Thus, you must keep your Chevrolet Malibu brake disc and pad kit protected at all times in order to keep its smooth operations. Here are some tips that you can follow:

  • Avoid too much heat for your brake disc and pad to prevent brake fade.

You can take care of your brake disc and pad kit by avoiding too much heat. This is because your brake disc and pad can easily acquire excessive heat during the braking process. Once this happens, the brake disc and pads can lose the frictional force that is needed to stop your vehicle safely. Hence, you must avoid abusing the use of the brakes. If your brake disc and pad starts to lose friction, then you must pull over and let your braking system to cool down. In this way, you can maintain the proper functioning of your brake disc and pad.

  • Inspect your brake disc and pad at least every 12,000 miles to check for signs of damage.

Inspection of your brake disc and pad is always recommended to prevent further problems. You can check the condition of the kit at least every 12,000 miles. In this way, you will be able to see if the brake disc and pads need to be repaired or replaced.

  • Use an automotive sandpaper and wire brush for a thorough removal of rust.

Surface rust on your brake disc and pad can be naturally removed through the contact of the brake disc and pads. However, if you notice that there is deeper rust that accumulated on your brake discs, you must take immediate actions. An automotive sandpaper and wire brush can help in removing tough rust deposits. Moreover, these cleaners can also smoothen out the surface of your brake disc and pad to improve their contact as they press against each other.

Chevrolet Malibu Brake Disc and Pad Kit Bestsellers View more

  • Knowing the Problems Related to Your Chevrolet Malibu Brake Disc and Pad Kit

    The brake disc and pads work together to produce the friction that your vehicle needs to stop safely. However, there are several factors that can affect the performance of your brake disc and pad. So if you experience braking problems, the issues might be related to your Chevrolet Malibu brake disc and pad kit:

    Evident decrease in stopping ability of the brakes

    If you feel that your braking system has an evident decrease in its stopping ability, then your brake disc and pad kit may be a possible culprit. This is because the pads and disc need to have sufficient time to cool down especially after heavy braking. However, if you abuse the brakes, your brake disc and pad kit will not be able to absorb excessive heat. As a result, the resin in the pads will vaporize into gas. This will then cause the friction in your brake disc and pad kit to be reduced.

    Vibration or wobble upon stepping on the brake pedal

    There is a possible problem in your brake disc and pad kit if you feel a vibration or shaky feeling upon stepping on the brake pedal. Because your brake disc and pad kit has a metal content, the disc and pads can warp and lose thickness because of normal wear and tear or due to too much heat. Once this happens, the brake pads will struggle to make contact with the brake disc properly. Hence, the brake vibration will begin to occur.

    Drawing of vehicle towards one side of the road upon braking

    If you encounter a situation in which you apply the brakes but your vehicle draws to one certain area of the road, then it can indicate problems in your brake disc and pad kit. The brake disc can deviate from the hub assembly once it wears out, which can make its edges move loosely as the wheel moves. Moreover, the brake pads can also wear out over time especially if they are affected by too much heat. So if your brake disc and pad kit undergoes the said situations, both the disc and pads will not be able to make proper contact with one another. As a result, your vehicle can pull to one side of the road every time you step on the brake pedal.