Chevrolet S10 Blazer Weatherstrip Seal
Pointers for Keeping Your Chevrolet S10 Blazer Weatherstrip Seal A-Ok
Weatherproofing a vehicle has always been an essential step in preparing your ride on the road. It keeps you and your interior dry despite having a bad weather outside. Besides, who would want to drive a vehicle where it is leaking everywhere when rain sets in? Not only will it distract you from driving, it will also soak all your interior panels in water. That is something we don't want to happen through the course of your life. This is why auto manufacturers invest on putting protective rubber component on your Chevrolet S10 Blazer. It is mounted on the openings of your SUV to stop water from seeping into the inside. To make sure it is always effective, you should make sure that you take care of it. Here are some pointers for keeping your Chevrolet S10 Blazer weatherstrip seal A-Ok.
- Inspect all of the weatherstrip seal attached on the openings of your S10 Blazer.
You should go over all the weatherstrip seal on your SUV and see if it is doing ok. Part of ensuring its condition is inspecting the mounts, possible cracks, and similar occurrences. Remember that the component is made of rubber and it will wither down as it continues to endure the elements. Exposure and age are primary factors why it breaks down. From there, you will know how much cleaning you will need to do on the weatherstrip.
- Prepare the materials that you will be using for cleaning.
Cleaning the weatherstrip seal involves only simple materials. You need to prepare a brush, clean cloth, pale with water, and silicon grease. Lay them out on a clutter-free area near your S10 Blazer before proceeding.
- Carefully brush and wipe the strip to remove dirt and other particles sticking to it.
Using the brush and water from the pale, remove the dirt that have been sticking to the surface of the weatherstrip. Make sure that you go through it well to fully eliminate the nasty materials on it. Use the cloth to wipe it dry after.
- Apply the silicon grease to protect the rubber.
After cleaning your strip, apply some silicon grease to protect the rubber. Spread it lightly and evenly.