DJM SUSPENSION CALMAX CONTROL ARM
These tubular-designed control arms are constructed using Drawn over Mandrel (DOM) Tubing that strengthens their defense against corrosive-causing variables. Urethane-formulated pivot bushings are also featured in Calmax Control Arms, complete with DJM%X92s exclusive twin tube sleeves. The urethane bushings are meant to be thermal resistant, weather proof and non-deflecting when under great stress or pressure. Unlike rubber, urethane remains as tough as it can get and though it squeaks when over tightened or even pinched, the twin tube sleeves are there to the rescue and prevent the unnecessary noise. These sleeves are the two inner pivot sleeves that are found inside the bushings, the inmost sleeve is much longer than its pair that prevents you from over tightening the bushings when installing. DJM Suspension Calmax Control Arms are devised to function well with factory springs and lowering coils to assist your trucks and SUVs with your preferred lowering height adjustments.