Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Dodge Ram 1500 Brake Disc

Simple Yet Effective Maintenance Tips for Dodge Ram 1500 Brake Disc

The brake discs are one of the parts that are most prone to wear in the Dodge Ram 1500, but you can keep them at bay with proper use and maintenance. Caring for the Dodge Ram 1500 brake discs is easy and requires only the most basic of tools. In this guide, we'll share some tips on how you can take care of your Dodge Ram's brake discs:

  • Keep your eyesand earsalert for any signs of wear or damage on the discs.

A hands-on inspection remains the best way to ensure that the brake discs in your truck are running on good condition. Common brake disc problems such as warping, pitting, and scoring on the disc surface can easily be identified. In addition, be on the lookout for strange squealing or grinding noises when braking. Aside from worn brake pads, these unusual noises may indicate a problem with the discs as well.

  • Avoid making sudden, excessive braking.

This will make the brake discs overheat, causing the brake pedal to pulsate (i.e. go up and down) and damage both the discs and the brake pad. If you will be driving under conditions that require constant braking, such as in urban areas with heavy traffic, try to ease up on the gas pedal so you won't stress the brakes too much.

  • Clean the brake disc with a disc brake cleaner.

Driving in muddy and dusty environments will quickly turn the disc brakes into a dirty mess. But cleaning them with a standard soap and water will not do. This is because soap can cause the brake disc to become too dry, causing the brake pads to squeal when they rub against the disc surface. Instead, clean the discs with disc brake cleaner. Readily available in most hardware and auto parts stores, brake disc cleaners are specially formulated to remove dirt, grime, and other contaminants from the brake disc surface without drying it out.

  • Keep oil, grease, and lubricant away from the disc surfaces.

This will make it difficult for the brake pads to engage the surface of the disc properly, resulting in greatly diminished braking performance. So if oil or grease manages to contaminate the brake discs, clean the discs immediately with brake cleaner.

Dodge Ram 1500 Brake Disc Bestsellers View more

  • Tips on Installing New Dodge Ram 1500 Brake Disc

    Whether it’s because of a warped rotor or you’re switching to a high performance model, replacing the disc brakes in your Dodge Ram 1500 should be done with precision and care. While it is recommended it have the brake discs replaced by a licensed mechanic, it is very much possible to do it in your garage, provided of course that it is done properly.

    In this guide, we will share some simple but important tips on how to install the Dodge Ram 1500 brake disc in your truck.

    Tip #1: Prepare all your tools.

    Replacing the brake disc will require a plethora of tools, including wrenches, sockets, ratchets, channel locks, pliers, and a hammer in case you need to knock out a rust disc out of a spindle. We also recommend having some brake cleaner, lubricant, and anti-squealing solution on hand as well.

    Tip #2: Make sure to clean the new brake discs before installation.

    Use brake cleaning solution to remove the protective film from the brake rotors and apply the anti-squealing agent to the new pads. If the pins that hold the caliper to the pad and disc assembly are rusted, clean those up as well with sandpaper and apply lubricant on them.

    Tip #3: Retract the brake caliper pistons.

    Before installing a new brake disc or brake pad, you need to push back the pistons of the caliper. Use a pair of channel locks to squeeze the pistons and empty the brake fluid under the bucket. Once the pistons have been retracted, tighten the bleeder and remove the channel locks.

    Tip #4: Bleed the brakes.

    Once the new brake discs are in place, the last step is to bleed out the air from the system. Extra air can lead to air compression whenever the brake pedal is stepped on, resulting in a sluggish braking response.

    Tip #5: Get a helping hand.

    While it is possible to fit in a brake disc on your own, having someone around to help you will make the process far easier. During bleeding, for example, someone has to sit in the driver’s seat to control the brake pedals while another person opens the bleeder.