Dodge Ram 2500 Radiator
Tips to Keep Your Dodge Ram 2500 Functioning at Its Best
The Dodge Ram 2500 radiator is toughly made to help in preventing your vehicle from overheating. This cooling component functions by letting the coolant flow through its system until it reaches the engine. Since too much heat can cause your engine to malfunction, the coolant absorbs its excess heat so to regulate its operating temperature. . Because of its essential function, your radiator needs to be kept in top condition at all times. Keep in mind that if not maintained properly, your radiator can be prone to damage. Here are some tips that you can follow to keep your radiator protected and damage-free:
- Drain the old coolant to avoid contaminating your radiator.
It is recommended to drain your old coolant after a long period being stored in your radiator. This can prevent contaminants from affecting the coolant that will flow through the entire cooling system. This draining process is commonly known as flushing. It can help to remove rust deposits in the inner part of your radiator by letting them be flushed with the old coolant.
- Make use of a radiator cleaning solution for enhanced protection.
You can add a radiator cleaning solution once the draining process is complete. This cleaner can allow the coolant pump to be lubricated, thus extending its life. In addition, this substance can help to fight rust accumulation that can possibly contaminate your cooling system. Keep in mind that you need to drain this cleaning solution afterwards, so you can avoid mixing it with the new coolant.
- Keep the coolant at the right level to maintain the smooth function of your cooling system.
You must always remember to keep the coolant at the right level. This is because the coolant that circulates throughout the system should always be sufficient so that the other components can function smoothly. If the amount of coolant in your radiator is low, it will not be able to cool down your engine. The best procedure you can do is to fill your radiator with new coolant, which should be distilled with clean water to make the mixture safe for use.