Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Dodge Ram 3500 Fender

Dodge Ram 3500 Fender: Some Problems Caused by Its Weakening Condition

Your Dodge Ram 3500 fender protects the body of your pickup truck against road spray that's thrown up by its tires. The fender also prevents those particles from reaching other cars behind you. Although it is built for strength and durability, the fender will show signs of wearing down through constant use. If you are starting to notice that your Dodge Ram 3500 fender is doing just that, then you have to perform some troubleshooting immediately. Listed below are some of the common problems you might encounter:

Corrosion on the fender's surface

Rust on the surface of your Dodge Ram 3500 fender is usually the result of an accident that took off the paint and exposed the metal frame of the vehicle. When the damaged portion reacts to air and water from the road, corrosion happens. Before the rust spreads all over the fender, you have to repair it immediately. You can buff the portion if the rust is still minimal or you have to repaint if the damage is no longer manageable. When the fender is already restored, you have to clean it regularly to prevent the rust from coming back.

Fender paint fading

When you start to notice that the paint on your Dodge 3500 fender is fading and starting to become dull, there's no other way to fix it than to repaint the entire part. Otherwise, the harmful effect of the sun's UV rays will only cause the paint to fade faster. You can determine the exact paint code of your car by checking the information plate found under the hood of your vehicle. Remember to buff the fender to give it a good shine and polish it for protection.

Coarse fender surface

Dirt and road particle can easily stick on the surface of your Dodge Ram 3500 fender. If you fail to clean your vehicle regularly, these may soon stick and cause the surface to feel coarse or rough. You can avoid this from happening by cleaning the fender at least once a week to prevent these impurities from accumulating on the surface. This is a very good tip especially if you constant drive your truck on tough road conditions.

Dodge Ram 3500 Fender Bestsellers View more

  • Keeping the Good Looks of Your Dodge Ram 3500 Fenders

    The big and monstrous Dodge Ram 3500 is a vehicle that's used to getting dirty. However, this doesn't mean that there's no point in maintaining and keeping its cleanliness. The fenders located near the wheels are just a small part of the truck's body that gets a big share of the stains. If these aren't taken care of, even damage to these pieces alone can destroy the overall appeal of the vehicle. Here are some of the easy and practical things you can do to keep the good looks of the Ram's fenders:

    Proper rust management

    Rust is one of the biggest enemies of a car's body and paint job. For the fenders, simply cleaning them is a good way to prevent getting buildup. You can apply a layer of wax on the surface for added protection. Also put a good amount of rust proofing spray or oil on the fender wells so that the accumulation doesn't attack the truck from below. If your truck has been a victim of rusting before, be sure to remove all traces of it and replace affected areas to prevent the problem from recurring.

    Warp prevention

    Heat can affect the shape of the Ram's fenders. Overexposure to sunlight results to expansion and creation of gaps between the bumpers. As a preventive measure, try to park the truck in a cool and shaded area so that you limit the stress induced on the fenders.

    Minor dent repair

    There comes a time when dents on the body can't be avoided. For the fenders, if the paint job isn't too damaged and the depression isn't as bad as you expected, you can give this a good and costless repair. Simply push from the inside to force the dent outward and restore the surface's looks as close as it can be to the original.

    Small cracks

    Small cracks can be repaired mostly with a good fiberglass patch job and a retouch of paint. Don't attempt doing the repair yourself if you aren't confident in your skills with fiberglass. However, if you feel you can do the project, go ahead and do it.