Ford F-250 Super Duty Cold Air Intake
Keeping Your Ford F-250 Super Duty Cold Air Intake in Smooth Working Condition
Your Ford F-250 Super Duty cold air intake has a huge positive impact on the over-all performance of your truck. This versatile and useful under-the-hood modification gives you increased horsepower and torque while keeping your fuel consumption at a low level. That is why proper maintenance of your cold air intake is important and luckily, it doesn't take a pro to do it. Here are some maintenance tips to help you keep your Ford F-250 Super Duty cold air intake in tiptop shape:
- Perform routine inspection.
For constant optimum performance, it's a good idea to check your cold air intake every 25,000 miles. Inspect the system thoroughly and look for any signs of dirt or damage. It's also best to consult your user's manual for the manufacturer's recommendation regarding your cold air intake's maintenance.
- Replace the filters as needed.
Changing the air filter allows better airflow into your vehicle's cold air intake. A clogged up or dirty air filter should be replaced as soon as possible to prevent negative effects on your ride's engine. Manufacturers also recommend that you change your air filter every 3,000 to 5,000 miles.
- Clean the whole system regularly.
Cleaning the whole cold air intake unit regularly is important to prevent build-up of dirt and grime. There are a number of cleaning kits available in the market, which are specifically made for cold air intakes. These kits usually include a set of spray and oil used to dissolve the dirt from your vehicle system.
- Keep the wires tightened.
When performing a routine inspection on your Ford F-250 Super Duty cold air intake, don't forget to check for any loose wiring connections. This is a common problem encountered with this type of air intake system and will likely result in incorrect mass flow sensor measurement. To prevent this problem, make it a point to keep the wire connections tightened as needed.
- Routinely check for blockage.
It's very common for the air passage of your cold air intake to get blocked by small debris. Regularly check your hose clamps and make sure to remove any dust or dirt that's blocking it. Reattach your hose clamps tightly to prevent it from getting blocked again.