Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Ford F-350 Bumper

Three Helpful Tips to Remember in Cleaning and Refurbishing Your Ford F-350 Bumper

Your Ford F-350 is toughly built to give you a thrilling experience especially when you prefer off-road driving. The rugged path can cause damage to your vehicle's exterior frame, thus you should invest in durable front and rear bumpers for added protection. Your bumper works by being one of the first lines of defense against minor collisions. Because of this, your bumper can be prone to dirt and damage. Hence, you should know the maintenance tips you should follow to keep your bumper intact. Here are some of them:

  • Use mild soapy mixture and a soft bristle brush for dirt removal.

For dirt removal, it is recommended to wash your bumper thoroughly. For this matter, you may use mild car soap and a soft bristle brush. The mild car soap can remove accumulated dirt and debris while keeping your vehicle's paint finish protected, and the soft bristle brush can prevent your bumper from being scratched. To brush dirt off more easily, it is better to leave your bumper soaked in water. This can help the soapy mixture to work more effectively, and can allow you to save more time in cleaning.

  • Use a lacquer thinner and sandpaper for effective paint stain removal.

For paint stains that accumulated in your bumper, you can use lacquer thinner and at least 220-grit sandpaper for removal. This is because the lacquer thinner is an effective solution for dissolving thick substances such as paint, and the sandpaper can serve as an aid for the thinner in removing the stain more easily. A 220-grit is enough for this matter because sandpaper with heavier grit can leave scratches on the surface of your bumper.

  • Repaint your bumper for an enhanced look and protection.

You can also refurbish the look of your bumper to keep its quality by reapplying a coat of primer and new paint. The primer is the coating that is put on your bumper before painting it, so the coat will be more hard-wearing and protected at the same time. Once you are done applying the primer, you must make sure that you will reapply the right color of paint for your bumper. Repainting your bumper can conceal its blemishes, and is much cost-efficient than having it coated and sprayed by professional services. You can also apply a clear coat for a smoother finish. In addition, this type of coat has a property that shields UV rays to avoid damaging your bumper.

Ford F-350 Bumper Bestsellers View more

  • Tips for a Convenient and Successful Installation of Your Ford F-350 Bumper

    The bumper of your Ford F 350 is an essential exterior component of your vehicle that you can depend on. It works by serving as shield for your ride's body in cases of minor collisions. Because of its function, your bumper can be damaged from too much road impact. Moreover, different elements may cause its quality to fade. Thus, you should know how to replace your Ford F-350 bumper and install a new one. You do not need a mechanic to do the process because you can actually perform the installation process. Here are some tips to get you started:

    Tip #1: Remove fasteners using a flat-bladed screwdriver to take away the old bumper easily.

    You must take away all fastening components of your old bumper before you can remove the bumper itself. This may also require removal of other surrounding components such as tail lights. Since there are fasteners that have buttons in the middle, it is better to use a flat-bladed screwdriver for their removal. You can store the removed components in place because you can use them for your new bumper if they are still in good condition.

    Tip #2: Test fit your new bumper to see if you need to drill holes.

    It is important to align your bumper first with the other body panels before securing it into place. This can allow you to see any adjustment you need to make. One of the modifications that you may need to accomplish is drilling holes. This is because once you place your new bumper over your vehicle's frame, the pre-drilled holes on your vehicle may not be aligned with that of the bumper's holes. Thus, you need to make the necessary drilling procedure on your vehicle's frame. However, you must avoid drilling holes on the surface of the bumper itself. This can prevent drilling mistakes from happening, which can alter your bumper's look and quality. To avoid errors, you can draw temporary markings on your vehicle's frame before drilling the holes.

    Tip #3: Use jack stands to support your elevated vehicle.

    It is better to have your vehicle elevated while removing the old bumper and installing your new one. This can give you greater access to the fasteners, which hold the bumper in place. They are found all over the front and rear bumpers' surrounding areas like the wheel well and even underneath your hood and trunk. For this matter, you can use jack stands to support your vehicle once its clearance is lifted.