Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Geo Metro Tie Rod End

Common Issues with the Geo Metro Tie Rod End

Designed as an integral part of your car's steering system, the Geo Metro tire rod end helps in steering your car's wheels to the left, right, or even keeping them faced straight and forward. Usually, tire rod ends can be found attached to the wheels' steering knuckles. Tire rod ends are basically structural rods built to hold tensile loads as well as handle compressive forces. They can even be adjusted and tuned to address your car's specific suspension needs. Just like any car part, tire rods are also prone to wear over time. If you notice unusual steering instances and tires drifting while driving, you need to troubleshoot your tire rod ends. Here are some common problems encountered with the Geo Metro tire rod end:

Sagging tires

This is one of the most common symptoms of a tire rod end going bad. When a tire rod end starts to malfunction, it won't be able to keep your vehicle's tires in proper tension. This leads to the car's tires sagging, which leads to driving instability. Check your car's suspension system and observe if the tie rods can still hold tension. If you see signs of wear, replace them immediately to avoid more driving problems.

Excessive play and slack

Malfunctioning tire rods cannot hold the tire rod assemblies together, resulting in excessive play and slack while driving. As the tire rods start to loosen up, your car's front suspension begins to slack which then makes it hard for you to steer and control your vehicle. When this happens, inspect the tire rods and check if they need to be tightened or greased. Look for signs of wear, and then replace all worn-out suspension parts.

Problems with tire alignment

The proper alignment of tires is critical to achieve the proper grip and traction control. If you're having problems aligning your car's tires, this is a clear sign that the tire rods are failing. A car's front end suspension needs to be properly adjusted to manufacturer's specifications to avoid uneven tire wear patterns. Also, make sure to check the inner and outer tie rods for signs of damage and replace them if necessary. Once the damage tire rod ends are replaced, re-align the wheels properly to resolve the issue.

Geo Metro Tie Rod End Bestsellers View more

  • How to Keep Your Geo Metro Tie Rod End in Good Condition

    Your Geo Metro tie rod ends keep your car's wheels aligned, and they also help control its lateral movement. These structural rods, designed to bear various compressive forces and tensile loads, are responsible for keeping your car's front suspension properly aligned. Also, they allow the wheels to move in different directions, helping the suspension system adjust through varying road conditions. Since tire rod ends are exposed to road bumps, potholes, and other road hazards, they need to be maintained regularly. Follow the maintenance tips below to keep your Geo Metro's tie rod ends in good condition for a safer driving experience:

    Check it regularly.

    In order to keep your car's tire rod ends in good condition, you need to check them regularly. The first thing that you can do is to check your car's tires for any signs of uneven wear. Malfunctioning tire rod ends can cause uneven or excessive tire wear. Next, you can check them for any signs of damage. Violent impacts from rough driving and road debris can result in anything from loose ball-and-socket joints to bent tire rod assemblies. Also, do not forget to check the urethane and rubber seals for cracking and wear. These cracks will allow sand and dirt to enter the tire rod end, eventually leading to corrosion.

    Clean it and grease it.

    Cleaning your car's tire rod ends is really necessary. Careful and thorough cleaning regimens keep dirt, mud, and sand particles from building up on your tie rods. Since these tire rods are usually made from metal, rust and corrosion can greatly reduce their operating life. Use a hose or pressure washer to remove dirt and debris from the car's tire rod ends. Once the area has been cleaned, apply grease on its ball-and-socket joints to reduce the rate of wear. However, if your car has a sealed or non-serviceable tire rod end, do not apply grease on it. Simply replace it when it's worn-out.

    Remove and replace all damaged or worn-out parts.

    Aggressive driving, rough road conditions, and normal wear are some of the factors why tie rod ends need replacement. Damaged tire rod ends can cause accidents which-in turn-lead to expensive repair bills. If you see damage and worn-out tire rods and bushings, replace them immediately. After replacing these parts, it's recommended that you have your car's wheels re-aligned to make sure they're in good working order.