Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

GMC Yukon Brake Disc and Pad Kit

Tricks to Get a Longer Service from Your GMC Yukon Brake Disc and Pad Kit

Can you imagine driving in a high-speed road without properly working brakes? This is probably one of the worst nightmares any driver could ever have. Aside from the fact that it can put you at risk of getting injured, it also poses danger to pedestrians nearby. So to promote safety and prevent unwanted casualties, keeping your brakes in top condition is essential. Here are some ways you can extend the lifespan of your GMC Yukon brake disc and pad kit:

  • Assess the condition of your brake pads.

Once in a while, you need to peek through your vehicle's inner systems to see how your car components are doing. This comes in handy when you are trying to extend the lifespan of your brake disc and pads. Whenever you have time, clean your entire vehicle using the right cleaning materials. Keep a record of when you replaced the brake pads to know how long it usually takes before these become worn out. Brake pads usually last between 30,000 to 70,000 miles, although this still depends on how you use your brakes. If you frequently apply the brakes, especially in city driving, chances are, the brake pads will thin out faster.

  • Don't load needless cargo in the trunk.

It's usual for drivers to bring in everything that they can stuff into their vehicles. Though this isn't particularly harmful on some components of your car, it can cause too much stress on the GMC Yukon brake disc and pad kit. To prevent premature brake pad wear, make sure you keep the vehicle's weight low. This way, the pads will not exert much effort on trying to stop the car with all the extra pounds.

  • Keep your speed low as much as possible.

Brake discs last longer than brake pads because they are harder. Your vehicle's brake disc is usually made of cast iron for three main reasons—it gives the disc adequate wear resistance; it's more affordable than steel or aluminum; and it works well in absorbing and distributing the heat to cool the brakes. If you want to avoid frequent brake disc and pad replacement, then drive at low speeds, if possible. It's important to know that running on higher speeds kills not just your SUV's brake disc, but also the brake pads because the faster you drive, the more friction is needed to stop the wheels from turning. And more friction the brakes produce, the faster the friction material wears out.

  • Use squeal-preventing solutions for the brake pads.

If you're skilled enough to work on the brakes, then apply some anti-squeal compound behind the brake pads to prevent pulsation. These solutions can come in the form of compounds, sprays, pastes, and foams, so choose one that works best for you.

GMC Yukon Brake Disc and Pad Kit Bestsellers View more

  • Your Symptoms Checklist for a Faulty GMC Yukon Brake Disc and Pad Kit

    If you have been using your car for a couple of years, then there's a huge likelihood that your brakes may start showing signs of wear. Such signs usually show up between 30,000 to 70,000 miles, and usually results from mileage and your personal driving habits. A city driver who uses brakes more often than drivers traversing freeways can experience brake wear earlier. To determine a faulty GMC Yukon brake disc and pad kit, here are some symptoms you can consider:

    Clicking sound when you step on the brake pedal

    Your GMC Yukon's brakes are designed to give you a seamless stopping function without creating any irritating noise. So when you find out that they are producing clicking sounds when you apply the brakes, then you need to take a peek inside your braking system to find out if there's enough friction material left on the pads.

    Brake pedal pulsation when you apply the brakes

    Brake pedal pulsation—it's a common sign that you need to examine your braking system. No matter what causes it, you need to keep your brakes in perfect condition; otherwise, you are bound to get into a serious road accident. To confirm if it's the brake disc and pad kit that's causing the problem, try to assess the vibration you feel when stepping on the brakes. If you feel something similar to a constant grabbing, then your vehicle's brake disc and pads are most likely up for a repair or replacement.

    Brake pads have lost enough friction material

    Sometimes, the quickest way to tell if the brake pads have gone bad is by doing a visual assessment. This isn't as complicated as inspecting your catalytic converter. In fact, all you need to do is to remove the tire, and look at the gap between the spokes of the wheel. Doing this will reveal the outer pad pressed against a metal disc or rotor. For reference, normal brake pads should have at least 1/4 inch thickness. Any thinner than this can lead to brake squeals and other brake-related problems and mishaps, so make sure you replace the brake pads immediately.