Jeep CJ7 Bumper
Three Simple Ways to Keep Your Jeep CJ7 Bumper in Tiptop Shape
The bumper isn't just there to give your vehicle a complete look; it's also responsible for protecting you against minor collisions. Because of the essential role that it plays, keeping your Jeep CJ7 bumper in prime condition is a must. The good news is, maintaining it is quite an easy and straightforward task. Check out some of the following maintenance tips for your Jeep CJ7 bumper:
- Clean and polish your bumper thoroughly.
Bear in mind that a dirty and dull bumper affects the overall appearance of your Jeep CJ7, so it's very important that you keep it well-maintained. A mixture of car wash soap and water is usually enough to do the trick. Vinegar is also a cheap and natural alternative in case the soap and water mixture didn't work well for you. Use a soft-bristled brush or a sponge to scrub off dirt, debris, and grime over the surface of your bumper. Once you're satisfied with the cleanliness of your bumper, polish it to restore its original gleam.
- Fix scratches, cracks, and dents as soon as possible.
Any form of damage over your bumper is sure to make it look unpleasant, causing your entire vehicle to look neglected as well. Fortunately, restoring it is a task you can perform at the comfort of your own garage. With a bit of patience and the right tools, you can hammer dents back into shape, put broken parts together with plastic putty or a thermoplastic repair kit, or touch up deep scratches through a little sanding and repainting. If the damage on your bumper is too severe, repairing it won't guarantee that its durability is still the same. Don't compromise the appearance and safety of your vehicle; consider getting a new bumper instead.
- Visually inspect for loose and missing components.
The screws that attach your bumper securely over your Jeep CJ7 will eventually come loose or go missing, especially if you've had it for quite a while. Before you take your vehicle out on the road, make it a point to check if all its screws are complete and intact. Replace missing ones and tighten up loosely connected screws as needed to keep your bumper from falling off your car while you're driving at a high speed on the freeway.