Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Jeep CJ7 Fender

Helpful Maintenance Tips to Keep Your Jeep CJ7 Fender Looking Superb

Your Jeep CJ7 fender protects your side panels from mud splatters and road debris. Aside from this, the fender also completes the overall look of your vehicle. It's built tough and durable, but the only way you can enjoy its benefits for a long time is by keeping it in its best condition. Check out these easy tips to keep your Jeep CJ7 fender looking clean and mean:

  • Make sure it's thoroughly clean inside and out.

Keep in mind that your fender is not just about style, what's on the inside also counts. So next time you clean it, don't just focus on its outer surface; you have to bathe the wheel well too. Washing the outer part of your fender is easy; you just need a fender-friendly cleaner and a soft-bristled brush for this task. The fender well, however, requires more patience and attention. Make sure you clean hard-to-reach areas to prevent dirt and grime from building up over these parts. You can also use a high-pressure washer to completely clean off accumulated dirt and debris.

  • Hammer deformed areas back into their original form.

No matter how much you clean your fender, it still won't look its best if it has dents over its surface. So whip your mallet out and start hammering small dents back into shape. Remember to do this lightly so as not to damage your fender further. For larger dents, it's recommended to let a professional do the work.

  • Fix rust as soon as you can.

Corrosion makes your vehicle look neglected and downright ugly. So don't just let rust eat right through your fender; do something about it before it gets worse. Using a wire brush or a steel wool pad, scrub the rusty areas of your fender thoroughly and try to get rid as much of the loose rust over its surface. You can also apply a small amount of rust dissolver over the affected area for a better result. After you make sure that all the rust has been removed, apply rust-inhibiting wax over the fender's surface to protect it from oxidation.

  • Check its connections routinely.

Always check the screws that securely hold your fender onto your vehicle. Replace missing and damaged screws and tighten up loose ones to ensure that your fender won't fall off while you're on the road.

Jeep CJ7 Fender Bestsellers View more

  • Three Visible Signs of a Damaged Jeep CJ7 Fender

    The main purpose of your Jeep CJ7 fender is to keep dirt away from the sides of your car. But aside from that, it also gives you extra protection in case of a minor accident. Of course, it's also a fact that your fender contributes a great deal to your vehicle's appearance. Taking its primary purpose into account, it's not unusual for your fender to succumb to wear and tear after some time. To help you determine if your Jeep CJ7 fender has reached the end of its service life, keep an eye out for these following signs:

    Dents and deformation

    It's your fender's job to protect parts of your vehicle in case of minor collisions. So, considering its function and location, dents and deformed areas are only to be expected over time. A dented or deformed fender may not give you the same amount of protection as it did when it was intact. Inspect and assess your fender—it would be best to have it restored by a professional if the extent of damage is severe.

    Loose and missing mounting hardware

    Over time, the mounting hardware that keeps your fender securely attached to your vehicle could come lose and go missing. If you notice your fender hanging lower than it used to, check if all its screws are securely fastened. If you find loose ones, tighten them up. You should also replace damaged and missing screws to prevent your fender from dangling dangerously close to the ground or from falling off completely.

    Loose or missing screws can also cause your fender to come into contact with your car's tire and create unwanted friction. This produces a distinct burnt-rubber smell that's hard to ignore. If you find yourself in this situation, fix the mounting hardware immediately to prevent further damage to your fender and tire.

    Rust spots and corroded areas

    Your Jeep's fender gets pelted by small rocks and road debris kicked up by your vehicle's tire. All these beatings are likely to result in scratches and nicks on the fender's surface. Rust will soon form over the exposed metal and will eventually corrode your entire fender if you don't fix it right away. Rust spots are fairly easy to identify since they come in a red-orange-brown color. You can try to repair this problem yourself by sanding off the rusted surface or patching up corroded areas.