Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Jeep Grand Cherokee Ac Condenser

Culprits behind Jeep Grand Cherokee AC Condenser Problems

Your AC condenser's primary function is to cool the gas created by the compressor and condense it back into liquid refrigerant form. This will then be used throughout the air conditioning system. Sadly, the part is not immune to wear and tear, and you might have to deal with cooling problems if the defects are not addressed immediately. If you do not know what to look for when your cooling system breaks down, then you are in luck. Listed below are just some of the things you need to watch out for in a defective Jeep Grand Cherokee AC condenser and the reasons behind them.

Cold air is non-existent

If you find that the air coming out of your air conditioning is not cold, then better check your condenser. The air conditioning part is faulty if leaks are present. In fact, when leaks are present in your condenser, the amount of refrigerant becomes low, which will eventually lead to a decrease in your air conditioning unit's capacity to create cold air.

Compressor shut-off

Defective AC condensers are sometimes manifested through compressor shut-off. You see, the AC condenser on a vehicle collects all dirt, oil, and filth out of the refrigerant from the compressor through the expansion valve. Sometimes, when there is too much oil, the condenser fails to collect the filth. This then leads to clogging and will eventually cause the compressor to breakdown. This is often manifested through an overheating system since the oil cannot flow properly, and the compressor lacks the right amount of lubrication. Luckily, this problem is easily addressed by flushing the sludge out of the system.

Defective condenser cooling fans

Another reason for a condenser break down is a defective cooling fan. An auto usually has two fans-one near the radiator and another near the condenser. These two parts work when the air conditioner is on. The cooling fan near the condenser gets its air from the engine compartment through the radiator and AC condenser. But if the fans fail, the compressor may overheat, which then causes the engine to overheat as well. You should check if the blower motors are working because a faulty one is usually the cause of damaged condenser cooling fans.

Jeep Grand Cherokee Ac Condenser Bestsellers View more

Jeep Grand Cherokee Ac Condenser Available Years

  • Ways to Keep Your Jeep Grand Cherokee AC Condenser in Good Condition

    Keep your auto's cooling system top notch by performing maintenance on the AC system. You will be surprised that performing a little flushing and cleaning once in a while can greatly improve your ride. You see, failing to do maintenance can in fact, cause engine overheating. If you are looking for easy ways to keep your Jeep Grand Cherokee AC condenser in good condition, then you are in luck. Listed here are just some of the ways you can improve the quality of your ride by servicing the vehicle's AC condenser:


    Keep the condenser coils clean.


    It is important to clean the condenser coils because failing to do so may greatly affect the cooling performance of the AC unit. Keeping them clean will help in maintaining the right amount of cooling needed for the hot gas, so it will condense back to liquid form. Luckily for you, cleaning isn't that complicated.


    Flush the auto's AC system to prevent condenser clogging.


    Flushing the auto once in a while is a good preventive maintenance procedure not only for the condenser but also for all the components of an AC system. You see, there will come a time when the dirt and filth collected by the refrigerant will build up and cause clogging, so it is crucial for every car owner to schedule a flushing of the AC system. The flushing equipment should not be hard to find. Just visit your local auto supply stores if you do not have one already.


    Flush the condenser for a quarter of an hour for optimum gains.


    To remove the debris and contaminants thoroughly, flush the condenser for at least 15 minutes. In addition, apply around 90 to 125 pounds-per-square-inch of pressurized air for around 30 minutes. Also, make sure that all the residual solvent is evaporated from the condenser for maximum gains.


    Other maintenance reminders

    Flushing the auto's AC system can be tricky if you do not know the right flushing solvent to use. So, before performing the flushing, make sure that the flushing agents used are compatible with your auto. You see, some types may leave a residue, and other types require longer times for flushing.