Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Jeep Wrangler TJ Weatherstrip Seal

Tips to Keep Your Jeep Wrangler (TJ) Weatherstrip Seal in Its Premium Condition

Your Jeep Wrangler (TJ) is a tough ride suited for an adventurous trip. Because of its constant exposure on the road, different particles or water droplets may enter its interior. For this matter, your weatherstrip seal is ready to perform the task of preventing unwanted road elements from entering right through your vehicle. However, it may be prone to damage because of the shielding purpose it provides. Thus, here are some tips on how you can extend the life and function of your Jeep Wrangler (TJ) weatherstrip seal:

  • A soapy mixture and a toothbrush can be used to remove dirt from your weatherstrip seal.

To remove dirt particles from your weatherstrip seal, you must wipe it in regular intervals. Moreover, you can wash it with a clean cloth soaked in soapy water. This can prevent the seal from sticking on the area where it is attached. If there are tough spots that cannot be removed by simply wiping or washing, you can use a toothbrush for scrubbing them off. It is not too abrasive, so you can ensure that it is safe for use.

  • Use a protectant for enhanced look and protection of your weatherstrip seal.

You can spray a rubber or silicone protectant on your weatherstrip seal after washing it. This is because the protectant can help in removing excess dirt. Moreover, it can give your seal an enhanced look. And because of the constant exposure of your weatherstrip seal to sunlight, the protectant can prevent it from being dull or faded.

  • Inspect your weatherstrip seal regularly to avoid further damage.

You must always examine your weatherstrip seal if it is still in good condition. Check for signs of loose connection or cracks, so you can prevent water and other road elements to enter right through the seal. An adhesive and a sealer can help in maintaining your weatherstrip seal. These can keep your weatherstrip seal in good place, and can prevent it from developing cracks and damage.

Jeep Wrangler TJ Weatherstrip Seal Bestsellers View more

  • Easy Tips to Remember when Installing Your Jeep Wrangler (TJ) Weatherstrip Seal

    Your Jeep Wrangler (TJ) weatherstrip seal is durably made to protect your ride's interior from different road elements such as rain, wind, and other residues, so you can enjoy your trip. The most common area where it is installed is around your vehicle's doors and windows. If you want to attach a new one in your vehicle, you must not worry as the installation process is quite simple. Here are some tips that can help you get started:

    Tip #1: Clean the mounting area for an easier installation.

    To install your weatherstrip seal properly, you must clean the area where it will be attached. If you have removed your old weatherstrip seal, you can use an acetone cleaner to wipe away the remaining particles or adhesive from the old one. In addition, you can use a 60-grit sandpaper to remove blotchy stains on the surface. This can promote better attachment of the adhesive, which will be used to bond your seal.

    Tip #2: Test-fit your weatherstrip seal to ensure that it will be secured properly.

    It is recommended to test fit your weatherstrip seal before attaching it. This means that you must place your weatherstrip seal over the area where it will be installed, only without any glue, pins, or adhesive. This process can save your time and effort from removing a misaligned seal once it is installed. Remember to push the weatherstrip seal along the edges as you fit, so it will be snugly lined up against the part where you will attach it.

    Tip #3: Apply the glue on your weatherstrip seal in moderate amount to prevent smudging.

    If your weatherstrip seal is attached using a glue, you must apply it in continuous and generous amounts. This can prevent water from seeping underneath its gasket. However, do not put heavy amounts all at once because the glue might smudge on the surface. It is recommended to put masking tape over the area where you install your weatherstrip seal to help with the drying process.