Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Kia Rio Axle Nut

Troubleshooting Tips: Kia Rio Axle Nut

An axle nut secures the wheel of your car to an axle. This axle facilitates the movement of your vehicle; hence, it constantly rotates at varying speeds depending on how you accelerate. It goes without saying that when the axle nut loosens, or ultimately fails, fatal crashes may occur. Save time and money by regularly inspecting the axle nut before mechanical glitches arise. Learn how to check the axle nut by reading the troubleshooting tips below. For all you know, this article may even save your life, too.

Are the wheels becoming increasingly hard to maneuver?

When an axle nut comes loose, it also does a lousy job at mounting the wheel of your Kia Rio to the various components that allow fluid movement. So, if you notice that you are having difficulty turning to the left or to the right, then it is just about time to tighten the axle nut on the wheels you suspect are carrying the weight.

You are trying to check the tension of the axle nut, and found out it is apparently too tight to crack?

If the vehicle happens to have survived at least fifteen years without the need to replace the axle nut, then that is a good thing. It only goes to show that you are taking very good care of your ride. However, if you recently had your car repaired at a shop-most especially if you had some work done around the wheel area-and you suspect that the axle nut has been replaced at an abnormally high degree of tension, you should detach and reinstall it yourself. An axle nut that has been installed too tight will damage the axle nut socket where it sits; this will become more problematic and expensive for you to repair.

The axle nut is corroded?

Now, this problem is very unconventional. You see, the axle nut should be manufactured using high-grade and non-corrosive materials, since it is very much exposed to moisture and its derivative. The only way to resolve this is by buying a new one from respectable stores and brands.

Kia Rio Axle Nut Bestsellers View more

  • Maintenance Tips: Kia Rio Axle Nut

    A faulty axle nut will not only cause you considerable damage to your wallet, it will also provide more room for fatal accidents. An axle nut mounts the wheel to the axle of the rotating shaft, which permits you from maneuvering your car. If the axle nut is slightly loosened or somehow dislodged from the axle nut socket that it is ensconced to, the wheel will feel wobbly and unresponsive to your attempts to turn right or left. Avoid having to go through such lengths as bringing your car to a mechanic for major repairs because the rotating shaft incurred worse damage, or because you got yourself into an accident. Below are some tips to help you maintain the axle nut at optimum performance level.


    Use a breaker bar if the axle nut is installed too tight.


    An axle nut that is put on too tight will crack the axle nut socket and the axle itself after prolonged driving. To know if it is indeed installed too tight, try dislodging the axle nut from the wheel. Expect that it will be tight, but not very much so that even when you have someone stepping on the brake pedal of your Kia Rio, the rotor fails to stay in place and it just keeps on turning inside the caliper. If this is the case, then use a breaker bar with a four-foot pipe on it. This will provide the leverage you need to uninstall the axle nut.


    Use a torque wrench if the axle nut is installed too loosely.


    The thing with an axle nut is that it requires the right amount of force and torque when you are installing it. Having said this, it is not very wise to just wing it when installing the axle nut yourself. Invest in a good torque wrench and be sure that you have adjusted the nut according to its standards.


    Prevent rust builup by applying WD-40.


    Not that you have to worry so much about it-especially if you bought an expensive axle nut that is manufactured from high grades of steel-but WD-40 prevents rust from building up on the axle nut. However, if you do coat it with WD-40, always check the torque of the nut. WD-40 also has a tendency to loosen the nut from its socket.