Nissan Pathfinder Radiator
Three Tips to Maintain the Optimum Performance of Your Nissan Pathfinder Radiator
Your Nissan Pathfinder radiator is fitted on your vehicle to keep its temperature cooled down. Because the engine can generate a lot of heat, the radiator is responsible for regulating this. It contains coolant, which flows through its system to keep your engine cool and working properly. Thus, you must maintain your radiator at all times. Once it is damaged, it can affect the temperature and performance of your vehicle as a whole. Here are some tips on how to clean and protect your radiator:
- Flush the old coolant away to prevent contaminants from entering your radiator.
If the coolant inside your radiator is stored for quite some time already, you must drain them. This is because the fluid might be contaminated, which is not safe for circulation. This procedure is commonly known as flushing. By doing this, you can ensure that possible rust deposits that settled inside your radiator will be removed. Moreover, flushing can allow the radiator pump to be lubricated. This pump should also be maintained because this is where the coolant flows in and out of your radiator.
- Use the appropriate cleaner, such a radiator cleaning solution, for enhanced protection.
During the flushing phase, you can add a cleaning solution in your radiator. This substance can protect your radiator from potential rust deposits that may settle and damage it. However, you must not add any cleaning fluid other than your radiator cleaner, such as bleach or vinegar. Although these are known as cleaning agents, their composition can damage the internal areas of your radiator.
- Consider the amount of coolant that must be in your radiator.
It is recommended to keep the amount of coolant in your radiator in full amount. This is because your radiator needs to send enough amount of coolant to your engine. So a low level of coolant can damage your cooling system and your engine as well. Make sure that the coolant you will add on your radiator is clean and diluted to make the composition mild enough for functioning. 50-50 is the standard mixture percentage of the coolant and water for your radiator but it can change especially in warmer climates.