Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Nissan Titan Bumper

Simple Ways to Keep Your Nissan Titan Bumper at Its Best

You know that the Japanese auto manufacturer Nissan got really serious in the full-size pick-up truck segment when they released the Titan in the early 2000s. Its dimensions and specifications were really meant to challenge the dominating American pick-up trucks like the Silverado and F150, as well as the Japanese Toyota Tundra. At the front, you will notice the pronounced Nissan Titan bumper. Its design is just what every modern trucker would crave for. Its lines flow with distinct angles and some subtle hints of futurism. But beyond its affirmative presence is really a protective panel of your truck. It shields the components in your engine bay from the radiator, block, front suspension, and many more. More than that, it absorbs collision impact so that not much will reach you inside. Let us thank this part for its service by taking care of it. Here are some simple ways to keep your bumper looking its best.

  • Be prepared to buff out light scratches on the surface of the bumper.

Someone has to give it to you straight. The bumper can and will acquire scratches from the time you driven it out of the dealership. These scratches are from the particles that your panel encounters from time to time. You can deal with them by buffing out the fine hairline scratches. Use the appropriate materials and products for this process. Make sure that you do not apply too much pressure during the buffing. This keeps the effects only on the clear coat. Also, don't buff your paint too much as it can thin out what is left of it.

  • Wash and scrub your bumper regularly.

Giving your truck a regular car wash can help preserve its seemingly immaculate condition. When you do so, don't ever forget your bumper. Hose down the dirt on your bumper thoroughly. Once it is wet, grab a wash mitt and soak it in a car shampoo mixture. Use this to scrub the surface to fully clean the panel. Do it gently to avoid putting on scratches on the paint.

Nissan Titan Bumper Bestsellers View more

  • How to Install a New Nissan Titan Bumper

    The Nissan Titan is committed to take the pace to a whole new level among Japanese pick-up trucks. It has the torque-y V8 block that is perfect for taking you miles away while pulling heavy loads behind you. But even with a powerful motor, you can sure use the slightest hint of aerodynamics in your truck's design. The Nissan Titan bumper has that. It has those certain symmetrical lines that make your truck look good while it cuts through the wind. But we are getting a little farfetched already. You should be reminded that this front panel's main purpose in your truck is to protect and absorb the hit during collisions. So what do you do when an accident happened and left your bumper in a really bad shape? This is the type where your local body works man would say the damaged bumper is a lost cause. It would be a good idea to get a replacement.

    Tip #1: Assess the entire situation then plot your course of action.

    When your bumper just took a major hit from a road accident, it would be wise of you to spend time assessing the damage. First, make a visual inspection of the damaged bumper. Look how bad it has gotten and if there are other panels that have been affected in the accident. After that, carefully remove the part from your truck with the help of someone. Once you clear the front, inspect your chassis. Look for signs of loose mounts and warped ends. Sometimes, a body shop can straighten it out for you. But let us hope that there is no damage there.

    Tip #2: When you get the replacement panel, do a test fit and make careful measurements.

    It is important that you make sure the part will be perfectly aligned to the entire truck. For that, you will have to do a test fit before bolting the piece to your chassis for good. Impose it on the front end and observe. Take careful measurements to make sure there is very minimal margin of error.

    Tip #3: Make sure to bolt the part well for safety reasons.

    Piece everything together but make sure that you bolt it well. This reduces the risk of the part being involved in any further accidents.