Toyota 4runner Sway Bar Link Kit
Troubleshooting Tips for Your Toyota 4runner Sway Bar Link Kit
There are several concealed components of your Toyota 4Runner that you often take for granted, and you will be surprised that once your vehicle breaks down, a certain uncommon part is the culprit. Same goes with your Toyota 4Runner's sway bar link kit. It is composed of the sway bar link and metal bearings that are responsible in keeping your vehicle balanced even if you are cornering. It could be in front or at the back of your vehicle, bolted to the suspension. Over time, it could break and cause you driving problems. Here are some tips on how to troubleshoot your Toyota 4Runner sway bar link kit problems.
One of the major disasters that you could experience if your sway bar breaks apart or if its components wear out is poor handling. Since the bar can no longer connect the chassis, it won't be able to perform its function in keeping your vehicle from leaning whenever you corner. Also, you might notice a fidgety handling if your sway bar is broken or damaged. When this happens, you need to replace it immediately with a new one.
If the sway bar link of your vehicle is broken, it would either dangle or fall off from your vehicle. The other piece would probably clink and clank as it comes in contact with its nearby steel components. This could be very annoying and alarming since this will also be coupled by a twitchy handling. What you can do is to check the sway bar link for missing or worn-out bushings or nuts that might have caused it to loosen.
If your sway bar link is in top condition, but you still experience handling problems, better check if the bearings are also in good shape. Sometimes, the bearings of the sway bar link kit are poorly lubricated, making them prone to wear and tear. These small parts are also prone to corrosion, so it is best to replace them once they are already rusting. Inspect them regularly to check if there is a need to replace them or if there are missing parts that also need replacement.