{"id":187461,"date":"2026-03-18T00:56:22","date_gmt":"2026-03-18T07:56:22","guid":{"rendered":"https:\/\/www.carparts.com\/blog\/?p=187461"},"modified":"2026-05-15T19:33:29","modified_gmt":"2026-05-16T02:33:29","slug":"how-to-install-a-license-plate-bracket-quickref","status":"publish","type":"post","link":"https:\/\/www.carparts.com\/blog\/how-to-install-a-license-plate-bracket-quickref\/","title":{"rendered":"How To Install a License Plate Bracket"},"content":{"rendered":"\nReading Time: <\/span> 6<\/span> minutes<\/span><\/span>\n

Installing a front license plate bracket<\/a>is usually a simple DIY job as long as you use the right mounting points, match the bracket to your vehicle, and avoid drilling where clips, sensors, or wiring may sit behind the bumper<\/a>. Some cars already have factory dimples, threaded inserts, or grille mounting tabs, while others need a no-drill bracket that uses tow hook threads or lower grille hardware. If anything feels forced or the bumper cover flexes too much, stop and confirm fitment before you keep going.<\/p>\n\n\n\n

\"crooked
To begin with, make sure you measure properly so you get it centered. This is an actual photo of a license plate bracket that was installed wrong. Notice that it should be directly under the GMC badge on the grille but is off to the right about an inch from where it should be. Most bumpers are pre-marked for the OEM tag bracket, so get an OEM or direct-fit bracket if you can. | Image Source: Richard McCuistian<\/figcaption><\/figure>\n\n\n\n

Key takeaways<\/h2>\n\n\n\n