Safety, Shipping, Service
In the face of COVID-19, we remain committed to you.
Select your vehicle
We do not have any compatible Mitsubishi Eclipse Car Bra .

Mitsubishi Eclipse Car Bra Customer Reviews

Purchased on undefined

Mitsubishi Eclipse Car Bra Articles

Culprits behind a Defective Mitsubishi Eclipse Car Bra

Most drivers consider a car bra only as an automotive accessory, but in fact, a car bra also provides protection and safety for your vehicle. With a car bra equipped on your Mitsubishi Eclipse, you will be more secured when driving, especially at night because it protects the headlights from being covered with dirt and debris, giving you better visibility. It also protects your car from paint damage. So if you think the car bra equipped on your auto is not providing the benefits it is supposed to give, then better perform some troubleshooting. Listed below are some common defects encountered with a faulty Mitsubishi Eclipse car bra and the reasons behind them.

Damaged paint job

A fully functional car bra should provide protection to your auto's paint job, but if it is the one causing damage to the paint job, then you might have incorrectly installed the part. You may also want to check underneath the car bra for trapped debris and particles. Even if the car bra is perfectly fine, the presence of particles under the part can damage the paint job and may even cause premature wear and tear. Trapped moisture is also a problem, which may lead to hood damage like rusting and corrosion.

Presence of molds and mildew

Improper maintenance is the most common culprit behind a mold-infested car bra. Even if the car bra on your auto is durable and efficient, it will likely cause damage if the part is not cleaned periodically. In fact, washing may also be the cause of mold and mildew buildup if thorough rinsing is not properly performed. You should be able to detect these car bra defects by simply detaching the part and inspecting for molds and mildew. A musty smell usually indicates the presence of fungi.

Flapping car bra

Ideally, a car bra should fit snugly to your auto. If it does not, then you may hear flapping when driving at moderate speeds. In fact, this can also damage your car's paint job. This defect is usually a result of improper fitting or incompatibility with the part. You should check if the car bra equipped is the right type for your auto.

Ways in Keeping a Mitsubishi Eclipse Car Bra Fully Functional

A car bra equipped on your Mitsubishi Eclipse provides protection to the auto's paint job by preventing dirt and debris from scratching the hood and grille's surface. Not only that, it also upgrades the car's appeal a notch higher, giving it a sleek and sporty look. But, if this part is left unmaintained for a long time, it may be the one to cause damage to your auto. If you have no idea how to perform safeguarding for your car bra, then here are some easy tips and tricks to keep your protective part in its best, working condition:

Perform periodic cleaning and washing.

Since the car bra is built to protect the front end of your car, you should expect it to be in constant exposure to dirt and debris. When these unwanted particles are left hanging about your car bra, you may find the part to deteriorate prematurely and even make the front end look unappealing. Luckily, you would only need to wipe the cover first with a damp rag, then wash and scrub it with warm, soapy water. Just be careful to dry and rinse the part thoroughly when done in order to avoid mold and mildew buildup.

Avoid driving through water and mud puddles.

It may look cool in the movies, but driving your auto through a puddle of water is not ideal if you want to keep your car bra in good shape. You see, your car bra is not entirely waterproof. Constant exposure to water can lead to moisture build up, which then contributes to premature rusting and even play a part in the presence of molds and mildew. So for maintenance, make sure that the car bra is removed after it gets wet and allow it to dry before reinstallation. If you don't have the luxury of time, some car bra types offer a functionality that allows the part to dry while driving.

Remove the car bra when planning to not use the auto for a long time.

If you are not going to use the auto for a long time, it is best that you remove the car bra, so the front end's paint fades at the same rate as the rest of the car's paint. Alternatively, instead of removing the car bra, you may just cover the whole car to prevent dust buildup and UV damage.

Helpful Automotive Resources

Mitsubishi Shares Details on Updated 2021 Eclipse Cross
September 25, 2020
Mitsubishi Shares Details on Updated 2021 Eclipse CrossBased on the teaser, the 2021 Eclipse Cross will get Y-shaped running lights, a higher rear end, a new set of wheels, and a more aggressive-looking beltline. Its front end, meanwhile, gets a C-shaped chrome applique positioned just below the LED running lights. This chrome detailing draws attention to the
Mitsubishi Eclipse Cross Gets Styling Updates for 2022
October 25, 2020
Mitsubishi Eclipse Cross Gets Styling Updates for 2022For the interior, the Eclipse Cross features new upholstery and trim options, including gray leather. It also comes with an updated infotainment screen—now bigger at 8 inches—and moved closer to the driver and passenger for easier access. The screen is placed in between the volume and tuning knobs, which is
2022 Mitsubishi Outlander Engine Confirmed
October 24, 2020
2022 Mitsubishi Outlander Engine ConfirmedIn spy shots that recently circulated on the internet, the upcoming Outlander is seen with noticeable features that are reminiscent of the Rogue (although it still has Mitsubishi’s unique front-end styling). The 2020 Mitsubishi Outlander won the Kelley Blue Book 5-Year Cost to Own Award for the second consecutive year. |
P0069 Code: Manifold Absolute Pressure – Barometric Pressure Correlation
October 06, 2020
P0069 Code: Manifold Absolute Pressure – Barometric Pressure CorrelationOnce the throttle is at a wide open position, the PCM may also check if the voltage signals from your MAP and BARO sensors are correct. Diagnostic Trouble Code (DTC) P0069 is logged when the powertrain control module (PCM) detects that the difference between the manifold absolute pressure (MAP) sensor
Next-Gen Mitsubishi Outlander Is Coming to the U.S.
July 31, 2020
Next-Gen Mitsubishi Outlander Is Coming to the U.S.According to Mitsubishi, the upcoming Outlander will be “bigger, bolder, and better” and will feature “game-changing” elements that its predecessors didn’t have.
Ford Gives F-150 Additional Standard Safety Tech
August 27, 2020
Ford Gives F-150 Additional Standard Safety TechPreviously, F-150 buyers looking for a truck equipped with automatic emergency braking didn’t have much choice but to get a Lariat trim or higher. But a spokesperson for Ford confirmed that the company is now making the tech available on all trim levels of the truck. This is in addition
Copyright ©2020, Inc. All Rights Reserved.
Terms of Use
Privacy Policy