Select your vehicle
We do not have any compatible Suzuki Sidekick Seat Belt .

Suzuki Sidekick Seat Belt Articles

How to Check for Suzuki Sidekick Seat Belt Problems

Your seat belt is highly important in ensuring your safety. You just never know when your car would collide with another vehicle or crash into a concrete wall. And when that moment comes, it is somewhat a relief to be buckled up with a properly functioning seat belt. It may not completely save you from harm, but it could lessen the seriousness of the injury that you might get. However, more often than not, you have no idea that you have a defective seat belt until that time when it is already subjected to great pressure-when you are already facing an impending accident. So here are tips on how you can diagnose seat belt problems before it's too late:

Damaged webbing

Inspect the webbing for damage such as cut loops at the belt edge, broken or pulled threads, stains, or burns. You would have to replace this part if any damage is present. Also, make sure that the webbing is properly extending and retracting by observing if the movement is smooth and easy. If not, look for dirt or contamination in the webbing itself or in the retractor housing. Examine if the webbing is twisted or if the retractor is damaged as well. Check if there is proper movement on the anchor bolts, too. If any of these defects come up in your inspection, change your seat belt webbing as soon as possible. Failure to do so could cause your seat belt to tear completely during a strong and sudden impact.

Latching problems

False latching is a very common seat belt defect. At first, you may be able to buckle up. However, it suddenly becomes undone once a certain amount of force is applied on it. Usually, this problem occurs due to a faulty latching system. Test your seat belt if it is prone to this kind of problem by applying 5 pounds of pressure on it. If your belt pulls free, you can be certain that it has a faulty latch. Replace this part at once. Also, you might want to consider inspecting for a corroded part in your seat belt's latching mechanism. Same thing needs to be done-replace the damaged component.

Ensuring Your Suzuki Sidekick Seat Belt is Fully Functional

How many times have seat belts saved lives? Countless. The importance of seat belt is already common knowledge-first, because it is a top safety measure; second, because it is required by law. Most people would find it hard to feel secured without a properly functioning seat belt in their car. It may not necessarily prevent you from getting harmed during an accident, but it is proven to reduce the chances of severe injury that could lead to death. So here are tips to ensure that your Suzuki seat belt is reliable:

Keep your seat belt clean.

It is a must to keep your seat belt clean to prevent dirt and grit from causing internal damage especially to the webbing. Clean your seat belt's webbing with mild soap and lukewarm water. Do not use bleach or solvents.

Inspect the webbing.

Make sure that the webbing is not damaged, frayed, or sun bleached. It should be flat and not warped. Warping means that the belt has been stretched excessively. In this case, the belt should be replaced as soon as possible. Also, check if the webbing is securely attached to its end fittings.

Have the tension checked by a professional.

Make sure that the tension in your seat belt meets the regulatory safety standards. If the strap on your seat belt is adjustable, you should be able to change it easily to suit any person's height. Also, it should travel smoothly through the buckles. If it doesn't, replace the strap immediately.

Check its components.

Examine the plastic and metal components of your seat belt for cracks, deformation, or any other damage. Make sure that the buckle latches securely and ejects freely. Look out for a broken memory wire, which is usually indicated by a clicking sound from inside the cable.

Test the retracting mechanism.

You can test your seat belt's retracting mechanism by holding the webbing and then pulling it out. You would know that it is properly working when the belt locks and then retracts once it is released. Also, the belt should pull out and retract completely without binding or sticking when it is being moved slowly.

Copyright ©2020, Inc. All Rights Reserved.
Terms of Use
Privacy Policy