Select your vehicle
We do not have any compatible Turn Signal Bulb Socket .

Turn Signal Bulb Socket Guides

How to Find the Right Turn Signal Bulb Socket

Aside from having a clear sight of the road, another thing that can mean the difference between life and death on the road is communication. And since you can’t talk with other motorists to tell them what you’re about to do, your car has been equipped with warning devices, which also serve as the medium for communicating with other drivers on the road. These warning devices usually come in the form of lighting components such as turn signal lights. Your vehicle is equipped with a set of turn signals and you use this device to communicate with other road users. With the help of this component, you can easily cruise down the streets, changing lanes and making turns without any worry that you’re going to hit another vehicle. This is because you are able to communicate to other drivers what you plan to do and in turn, they are able to react properly. If you happen to have a broken turn signal bulb socket in either one of your turn signals, you might find yourself in trouble. So, before it’s too late, you’d better get the component fixed ASAP. Here are some of the things that you need to consider when buying a new socket for your turn signals.

Location

Your vehicle is equipped with turn signals both at the front and rear end. And since all sockets may look the same, you need to be careful when making your purchase. To make sure that you get what you need, read the product description of the aftermarket socket very carefully and see to it that it will fit its mounting area.

Fit

For seamless installation, always choose direct fit products over their universal counterparts. Note that direct fit components are made to fit your vehicle make and model while universal parts, though they may cost a little less, may require major or minor modifications to fit your ride.

Anti-corrosion

One of the things that cause bulb sockets to deteriorate and malfunction is the formation of rust. To prevent this from happening, always choose a socket that has anti-corrosive coating.

Tint

If you also need to change the bulb of your turn signals, make sure you get one that comes in a color that won’t get you into trouble. To find out if you’re eying the wrong product for your repairs, always check your local laws to stay on the safe side.

How to Fix a Turn Signal Bulb Socket

If you’re going to make a turn on the next corner or if you’re going to change lanes on the highway, it’s important to use your turn signal lights to alert other drivers of your next move. This will help them plan out what they’re going to do next—they’ll can move away from you, slow down, or make a full stop to allow you to go to the direction that you want. If you have a busted turn signal bulb socket in your vehicle, your turn signals might not work and you won’t be able to use it as an early warning device. You’ll definitely have a hard time communicating with other drivers or pedestrians and you might end up in accident if the problem is left unchecked. To prevent this from happening, you’d better replace your car’s faulty bulb socket soon. Here’s a quick guide that will teach how to do it.

Difficulty Level: Easy

Things you’ll need:

  • Metric wrench set
  • Wire cutter
  • Electrical tape

Step 1: To begin, turn the engine off and then disconnect the negative cable from the car’s battery to protect yourself from getting electrocuted.

Step 2: Once the vehicle is secure, remove the turn signal bulb socket from the lens of the component. It should be accessible through the lens, but this may differ depending on the car that you own. Remove the socket by twisting it counterclockwise until it is completely loose.

Step 3: As soon as the socket is out, replace it with the new one by cutting the two existing wiring connections, stripping of a quarter of an inch off. Once you’ve cut them, twist these wires with the matching colored wires on the replacement socket.

Step 4: After that, wrap the new wiring connection with electrical tape to secure it in place and then install the old or new bulb. The bulb will have two tips on its connector sleeve and you need to slot these as far as you can into the socket housing.

Step 5: Next, reconnect the negative cable of the car’s battery and then test if changing the socket has fixed your turn signals.

Visit Our Blog
Follow Us
Shop With Confidence
Copyright ©2020 Carparts.com. All Rights Reserved.
Terms of UsePrivacy Policy