Need Assistance? Live Chat

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Chevrolet K3500 Bumper

Common Culprits behind a Defective Chevrolet K3500 Bumper

A pickup truck like your Chevrolet K3500 is built tough to provide you a safe and trouble-free ride, even in rough terrain. So, a durable vehicle like yours needs a strong defense, and that's where your car bumper comes in play. The car's bumper is primarily designed to protect the car's front end by reducing and absorbing the shock from impact in case of a collision. Over time, your bumper may corrode due to a variety of reasons like improper maintenance, or the part may have simply exceeded its service life. If you suspect your stock bumpers to be defective, then you had better perform some troubleshooting. Listed below are some common problems encountered with a faulty Chevrolet K3500 bumper and the reasons behind them.

Fading bumper paint

It's a good thing that diagnosing bumper defects is easy because you will mostly only need to visually inspect the part. One of the noticeable problems encountered with bumpers is fading bumper paint. There are a lot of possible culprits for this. In most cases, this is caused by too much sun exposure. The bumper can also suffer from a damaged paint job due to scratches from minor accidents. Luckily, these paint problems can easily be addressed by repainting them. This simple procedure can help in preventing the premature wear of the bumper parts.

Rusting bumper

Rusting bumpers usually come after flaking bumper paint. Since most bumpers are made of steel and are more exposed when the paint job is damaged, they are more likely to rust and corrode easily. This will not only damage the bumper's looks but also compromise the safety of the auto's front end. Fortunately, the rusting spots are not that hard to spot. And, it's a good thing too that cleaning off rust may be as simple as using aluminum foil and using soda as a rust dissolver. To prevent premature wear, always find time to clean the bumpers if you have recently driven to a flooded area or through a puddle of water.

Cracked bumper

If you have recently been in a collision and damaged and cracked your auto's bumper, then your only hope to restore its original functionality is to replace it. In cases where only minor dents are present, the part may be hammered back to its original shape. But, the most ideal solution is still a replacement.

Chevrolet K3500 Bumper Bestsellers View more

  • Chevrolet K3500 Bumper Replacement $341.49 $212.28

    Replacement Bumper


    Fitment Details

    View more
  • Chevrolet K3500 Bumper FEY $274.82 $232.90

    FEY Bumper


    Fitment Details

    View more
  • Chevrolet K3500 Bumper Bolton Premiere $326.66 $276.83

    Bolton Premiere Bumper


    Fitment Details

    View more
  • Chevrolet K3500 Bumper ReplaceXL $240.21 $203.57

    ReplaceXL Bumper


    Fitment Details

    View more
  • Tips in Keeping a Chevrolet K3500 Bumper in Top Condition 27 February 2013

    The bumper on your Chevrolet K3500 is primarily crafted to reduce damage to the auto's front and rear ends in the event of a low-speed collision. If the bumper parts are left unmaintained, it will not only compromise the engine parts, but may also affect your safety. So, as a car owner, you should at least know basic maintenance procedures to keep the bumper in good shape. Here are a few tips and tricks so your Chevrolet K3500's bumper will remain in its top condition:


    Rinse dirt and grime off of the bumper with high-pressure water hose.


    Using sponge to scrub grime and dirt off of the bumper is not a good idea because it can scratch the surface and may even cause dirt build up. So as an alternative, you may rinse signs of dirt and debris with a high-pressure water hose. This is safer and generally more effective than simply sponging the bumper's surface. Once you are done with the rinsing, use a soft wool cloth to remove any dirt particles that were left behind.


    Repaint scraped and damaged bumpers.


    A flaking paintjob is a common occurrence in bumpers since they are constantly exposed to the sun. Bumpers are also positioned in a way that they are the first ones to take damage, so they will need more attention than other car parts. See, a flaking bumper is more susceptible to corrosion damage. Since the metal is exposed, there is a greater risk of it being in contact of water and moisture, therefore, causing premature rusting. Fortunately, repainting the damaged part is an easy fix to help prevent further defects and early wear and tear.


    Remove rust spots and corrosion.


    Even with a tight budget, you can easily perform maintenance on rusting bumpers with tools that are readily available at your own home. DIY experts suggest a ball of aluminum foil as an alternative to wire brushes and soda to replace the rust dissolvers. Once the tools are prepared, simply wipe the rust off of the bumper with the ball of aluminum foil dipped in a bowl of soda. Afterwards, to keep rusting problems at bay, apply a coat of polish to the bumper's surface.