Need Assistance? Live Chat
Need Assistance? (Se Habla Espanol) Call 1-877-702-1308 or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Chevrolet S10 Radiator

Helpful Tips to Fix the Common Chevrolet S10 Radiator Problems

Your Chevrolet S10 radiator can succumb to the everyday wear and tear of driving like broken hoses, a cracked radiator, and a rusty interior. To help you do the quick fix for these radiator problems, here are some useful troubleshooting tips:

Damaged hoses

Your radiator hoses can get damaged overtime due to excessive heat, which may cause coolant to leak. That's why you have to check the condition of your hoses whether they're already rotting or not. If you find leakages on the hoses, you should wipe off the coolant first before covering it with duct tape. However, keep in mind that this is just a temporary fix. You must immediately buy replacement hoses from any auto supply store and install them on your car. You may also want to get new hose clamps just in case those that hold your hoses are already showing signs of wear.

Cracked radiator

You may get a few cracks on your radiator, possibly from driving on extremely rough terrain or from a minor crash. And if your radiator suffers a crack or two, expect your car to frequently overheat as puddles of coolant leak on the ground. To fix this problem, you can apply cold weld epoxy over the leaks after you drain and dry the radiator. However, you should remember that you still need to have your car checked by the mechanic after sealing the cracks with epoxy. This is to make sure that your radiator will still be fit for use. Otherwise, you may need to replace it to avoid further problems.

Rust

The radiator on your S10 can also have rust, which can make your car overheat more often and, later on, affect the overall performance of your car. That's why it's very important to get rid of this problem as early as possible. To fix this, you just need to buy coolant flush system from any auto supply store and follow the instructions at the back. Make sure that your engine is turned off every time you drain your radiator and that you let it cool down before you start working on the repair if you don't want to get your skin burned.

Chevrolet S10 Radiator Bestsellers View more

  • Helpful Tips in Having a Clean Chevrolet S10 Radiator Inside and Out 27 February 2013

    Car owners should realize that they need to regularly clean the radiator to prevent it from getting easily damaged. That's why it's important that you properly maintain your Chevrolet S10 radiator if you want your component to extend its life. To help you achieve this, here are some useful cleaning tips:


    Cleaning the interior

    Use a cooling system cleaner.


    Flushing your radiator on a regular basis is advised to keep it clean of any rust, dirt, and debris. So if you haven't done this on your S10, it's best that you do it as soon as possible. Just remember to buy a good-quality, engine-friendly cooling system cleaner or flush from any auto supply store. But if you're not sure which to get, you can always ask your dealer. Just make sure that when you use this product, you follow the instructions at the back to achieve good results.


    Add distilled water.


    If you have previously filled your radiator with the cooling system cleaner, you will need to also fill it with distilled water to rinse the cleaning solution. You can repeat this process after running your engine for a few minutes to make sure that you have thoroughly rinsed the radiator.


    Select the appropriate antifreeze.


    If you want the radiator on your Chevy to last longer, you will have to carefully select the most appropriate antifreeze for your car. You can either read your car manual for its recommended antifreeze or you can consult your dealer. Keep in mind that antifreeze is actually corrosive, so you need to give it some thought before buying to avoid harming the radiator.


    Cleaning the exterior

    Spray degreaser.


    You only spray degreaser on the outside surface of your radiator. This should help soften any hardened dirt and grime or bugs in between the radiator fins. Just make sure that you let the degreaser sit on the radiator for a few minutes before you remove any dirt and debris.


    Try the vacuum cleaner.


    You can also use a vacuum cleaner to clean any clogged particles on your radiator fins. Just make sure that you use the flat and thin type for effective cleaning.