Ford Ranger Camshaft Position Sensor
Ford Ranger Camshaft Position Sensor Troubleshooting Guide
Pretty much everything under the hood is responsible for keeping your engine working properly. So if one part fails, your vehicle is likely not going anywhere. What makes the whole engine complicated is one symptom may be attributed to several parts in the engine. It may take an expert mechanic to determine the problem, but here, the focus is on the Ford Ranger camshaft position sensor.
As with any vehicle, the Ford Ranger camshaft position sensor keeps the engine running smoothly and efficiently by sending information to the electronic control module (ECM) to produce the correct firing order. Without a properly working camshaft position sensor, the engine may misfire -characterized by a loud noise in the engine as if the engine is about to die. Other symptoms of a faulty camshaft position sensor are engine hesitation or stumbling, stalling, poor idle, rough riding, long cranking time during cold start, and drop in fuel efficiency. Replacing the camshaft position sensor is a common fix, but check first if it just needs some cleaning. This is an easy DIY project; even someone with basic mechanical skills can do this correctly.
Engine does not start
A bad camshaft position sensor can cause the engine not to start. Now, there are several factors that will cause the engine not to start. You must be able to determine the root cause of the problem by checking the battery, starter, terminals, spark plugs, and solenoid. Check the sensor wiring too, as loosely connected wiring can cause similar engine problem-check for corrosion. If you have eliminated all the other factors, check the camshaft position sensor. Normally, removing the carbon with a dry cloth does the job.
OBD-II reader is telling "camshaft position sensor malfunction"
The good thing about the OBD-II reader is that it tells the difference between faulty camshaft position sensor and a more expensive engine. While it may not be standard equipment for car owners, your mechanic has it and will use it to check for engine problems. If the camshaft position sensor is found faulty, replace or clean it.