Ford Windstar Hood Protector: What to Do when Different Problems Arise
The hood protector of your Ford Windstar doesn't only boost your vehicle's appearance, it protects the hood from road debris and bugs as well. However, this part will eventually get damaged and cause problems due to wear and tear and other factors. So you will not panic in case these happen, check out the list below of some of the common hood protector-related problems and how to solve them.
Although your Ford Windstar hood protector is built to last for a long time, it will still get damaged due to various factors. Sometimes, due to large road debris, this part gets chipped, therefore losing its ability to protect your hood. If this is the case, you must replace your protector immediately. However, if you don't want to spend a lot of money, then you can try repairing the cracked parts using a plastic adhesive that can be purchased from your local auto parts store. However, make sure that you will use a syringe so that the adhesive will not spread on other surfaces.
If the paint job of the hood protector installed on your Ford Windstar is chipped, then you have to repaint it immediately so it will not become an eyesore. However, before you apply a new coat of paint, make sure that you will wet sand it first using a 400-grit sandpaper so that the paint adhere well. Also, apply several coats of primer to make the paint last for a long time.
Over time, the hood protector of your vehicle will have dull spots because of dirt accumulation and road debris. As a result, it will become unappealing, and it will give your Windstar an unkempt look. Though buying a replacement protector is the best course of action for this problem, restoring the protector using plastic polish is also a good idea. Just make sure that you will clean the protector well using car soap before applying the polish for best results. What's more, you also need to use a buffing pad and power drill to buff the plastic polish.