GMC Yukon Bumper
Common GMC Yukon Bumper Problems and How to Fix Them
One of the most important parts installed on your GMC Yukon is the bumper. Typically made from high-quality materials, this part is designed to protect you and the different parts of your vehicle in times of collisions. However, over time, you may encounter several problems with this part because of various factors. Listed below are some of the most common bumper issues that you need to watch out for.
Hard to remove bumper stickers
If you are fond of bumper stickers, then you have to make sure that you know how to remove them properly to avoid damaging your GMC Yukon bumper. One way to do this is by using a hairdryer and plastic spatula. In case the adhesive used on the stickers is too difficult to remove, then you may need to heat the stickers a few more times. You can also use rubbing alcohol to clean adhesive residues.
Sometimes, due to collisions, the bumper of your GMC Yukon will become lopsided. Once this happens, the bumper will not be able to provide optimum protection, and your vehicle will look unappealing. To solve this problem, you need to adjust the crooked section. However, make sure that you have the right tools because you need to loosen some of the bolts that are holding the bumper in place.
Another problem that you may encounter with your GMC Yukon bumper is having a dented section. Usually caused by a collision, a dent can be easily fixed especially if you have the right tools on hand. For instance, if your vehicle is equipped with a metal bumper, then you need to use a hair dryer and can of compressed air. On the other hand, if your bumper is made of plastic, then you need to prepare a rubber mallet, hairdryer, and damp cloth.
Bumper scrapes are something that you can't avoid especially if you are fond of driving your GMC Yukon. Unfortunately, even though they are common, scrapes are very unappealing. If you want to remove them on your own, then you need to repaint your bumper. Just make sure that you will wet sand it first using a 400-grit sandpaper. What's more, be sure to use the right kind of automotive paint to avoid causing more damage to the bumper.