Need Assistance? Live Chat
Need Assistance? (Se Habla Espanol) Call 1-877-702-1308 or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Honda Civic Quarter Panel

Easy Troubleshooting for Honda Civic Quarter Panel Problems

Your Honda Civic's quarter panel is made from high-quality steel materials, just like the rest of the car's body. However, it is situated near the tire wells where moisture and dirt usually build up. Corrosion, among others, is one of the most common complaints of car owners with regard to their quarter panels. If you've been seeing a couple of rust spots on your vehicle, might as well do a visual inspection on the insides of the quarter panels. Here are some of the problems with the Honda Civic and their causes:

Rusty quarter panels

After inspecting the insides of the quarter panels, you can confirm if your car's quarter panel is starting to rust. Rust spots are the most obvious signs of corrosion. The rust works its way from the inside out; better check the insides of each panel of your car and apply rust-proofing immediately. After you have rust-proofed the panels, make it a habit to clean the tire wells thoroughly whenever you wash your car. This is to ensure that they won't cause the panels to corrode again.

Dents and scratches on the panels

Since the quarter panel is part of the exterior of your vehicle, it is prone to all kinds of damaging elements, such as debris, rocks, and dirt that could scratch or dent your car. Its location, near the tires, makes it more susceptible to damage by road dirt. For light scratches, clean the area and apply a hand rubbing compound to remove them. For noticeable dents, they would be harder to restore by yourself, so you better take your car to the mechanic.

Rear passenger door won't shut

If you've been having troubles closing the rear passenger doors shut, then maybe the weatherstrip seals of the doors no longer fit its opposite side in the quarter panel. The sides of the quarter panel might be damaged or rusty, making the seals unable to attach. Sanding the corroded part and applying putty on the gaps of the quarter panel are just some of the quick repairs that you can do. You can also bring your vehicle to the mechanic to have the panel repaired.

Honda Civic Quarter Panel Bestsellers View more

Honda Civic Quarter Panel Available Years

  • A DIYer's Guide to a Rust-Free Honda Civic Quarter Panel 27 February 2013

    A part of the car's body, the Honda Civic quarter panel is often repaired than replaced, since removing it requires a higher level of skill compared to other auto repairs. It is commonly made from sheet metal, just like the rest of the car's shell, although there are some cars that have fiberglass or fiber-reinforced plastic quarter panels. However, for those with steel ones, rust is the main cause of premature wear. To keep your quarter panel rust-free, take note of these tips:


    Apply rust-proofing on the insides.

    Since the rust works its way from the inside out, then it is best to have the insides rust-proofed first. You can use a good but affordable rust-proofing spray or paint for this preventive maintenance. Do this on both sides and make sure to cover the entire area, especially the corners of the quarter panel. Check for rust spots and remove them immediately before they spread.


    Remove rust spots.

    So you're a bit late-there were already rust spots on your quarter panels. You can still apply rust-proofing, but after you remove the rust. You can use a sand paper to scratch the spots off; make sure to dust off the rust so it won't get into the other parts. After you have removed the spots, put some rust converter to the areas and let it dry. If necessary, apply auto-body putty to fill the gaps were damaged by the rust. Don't forget to coat the area with primer and paint of the same color as your car.


    Cut out the rusted panels and weld new ones.

    If the damage is beyond repair, then you have to replace the rusted or dented quarter panels. This is to prevent rust from spreading to the other car components, and to keep your car in a good condition. Since this is your last resort, you may want to consider buying a corrosion-resistant replacement-one that is made of fiberglass or plastic.


    Wash your tire wells regularly.

    From the dirty and wet tire wells of your car are where the rust originates. Use a good cleaner that is specifically for tire wells. Clean them completely and regularly to avoid moisture buildup that could cause rust. Make sure to let them dry before you use your car again.