Hyundai Elantra Grille
Hyundai Elantra Grille: Issues to Watch Out for and How to Fix Them
One of the most important parts installed on your Hyundai Elantra is the grille. Typically made from high-quality plastic, this part helps keep your engine cool and protected from road debris. Unfortunately, although it is designed to last for a long time, it can still get prematurely damaged. As a result, it may cause problems that can be very difficult to resolve. Check out the list below for some of the issues that you may encounter with your vehicle's grille:
Stubborn bug residues
Seeing bug residues on your grille is an ordinary thing especially if you love taking your Hyundai Elantra for a drive. However, these residues can be troublesome because they can cause corrosion if they are not cleaned thoroughly. Fortunately, removing bug stains is very easy, and it can be done at home. You just need to use a bug and tar remover that can be purchased from car parts stores. Just make sure that you will allow this solution to set for a few minutes on the stains before scrubbing your grille with a soft-bristled brush. Also, in case the bug and tar remover causes discoloration, then you need to use a clay bar to restore the grille.
Peeling chrome finish
After some time, the paintjob of your Hyundai Elantra grille will peel or chip because of road debris and other kinds of corrosive elements. Once this happens, you need to restore the grille immediately to prevent further damage. To do this, you need to prepare the following materials: steel wool, trisodium phosphate cleanser, galvanized metal etching spray primer, and oil-based spray enamel. If you are not going to paint the entire grille, then you have to make sure that you have some painter's tape on-hand. Also, make sure that you will allow the grille to dry for a few hours after abrading it with the cleanser and steel wool.
If your Hyundai Elantra grille is peppered with scratches, then you need to restore it to make it look new again. For instance, if your grille is made of high-gloss plastic, then you can use a plastic cleaner, glaze, and polish to remove the scratches. However, make sure that you will use a foam pad when applying these products because using an abrasive material will only cause more damage.