Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Hyundai Tiburon Intake Manifold Gasket

Signs of a Faulty Hyundai Tiburon Intake Manifold Gasket

Your Hyundai Tiburon's intake manifold is the vital part of your internal combustion engine that delivers the air-fuel mixture needed by your car. However, your intake manifold can't function properly with your intake manifold gasket. By ensuring that your intake manifold is sealed, your intake manifold gasket guarantees efficient combustion. Over time, this component will become worn out and will need to be replaced. Here are the symptoms and causes of a damaged Hyundai Tiburon intake manifold gasket:

Coolant leaks

If coolant is leaking from your intake manifold gasket, you will probably notice a puddle of the colored fluid on the ground. However, due to the location of your intake manifold gasket, coolant leaks can also disappear or evaporate before the droplets even touch the ground. To check for leaking coolant, examine the surrounding areas of your intake manifold gasket when the engine is cold and look for any sign of coolant around it. Since coolant has a distinct smell, you can also try sniffing around the area to detect the leak.

Take note that an intake manifold gasket can have both external and internal leaks, so be sure to look out for both. Try looking at your oil dipstick. If it has a milky or foamy consistency, you probably have an internally leaking intake manifold gasket. Another symptom of an internally leaking intake manifold gasket is an overheated engine and rapid loss of coolant.

Whistling or gulping noises

A cracked or loose intake manifold gasket is one of the common culprits behind whistling or gulping noises near the intake manifold. Small cracks usually result to a high-pitched whistle due to the air that is being drawn by the engine. If the crack or gap is big, the whistling will turn into a gulping or sucking sound.

Rough idle and poor engine performance

Since a faulty intake manifold gasket can tamper with your vehicle's air-fuel mixture, it will be quite normal for you to experience a poor performance from your engine. Idling problems, stalling problems, and loss of power are also some of the symptoms that accompany a loose or leaking intake manifold gasket.

Hyundai Tiburon Intake Manifold Gasket Bestsellers View more

  • Taking Care of Your Hyundai Tiburon Intake Manifold Gasket

    Your Hyundai Tiburon intake manifold gasket plays a very important role in making sure that your engine gets the proper air-fuel mixture that it needs to perform at its best. However, dirt, heat, old age, and corrosion can cause this small metal sheet to deteriorate. To ensure that your intake manifold gasket performs properly, here are some maintenance tips for you to follow:

    Torque your intake manifold gasket bolts properly.

    For your intake manifold gasket to seal your intake manifold properly, it has to be torqued just right. If you are replacing your intake manifold gasket, take care not to tighten the bolts to much or you might risk pinching the intake manifold and the gasket itself. Keep the bolts too loose and you will have leaking problems. To be safe, consult your service manual for the steps on how to properly torque the mounting bolts on your intake manifold gasket.

    Monitor your coolant level.

    Taking note of the coolant levels in your radiator and coolant reservoir can help you determine if you have a leak somewhere in your system. Normally, rapid loss of coolant will point to a cooling system problem. However, if your coolant is still disappearing mysteriously even if all the components in your cooling system are in good condition, then you should poke around your intake manifold gasket to see if it is the leaking component.

    Keep your intake manifold gasket clean.

    Rust and debris that accumulate on the intake manifold gasket can result to the weakening of the sealing power of the gasket and the possible contamination of the air-fuel mixture. As part of your routine maintenance, make sure that you clean your intake manifold gasket using a stiff wire brush and some rust remover. Don't forget to brush off the contact points between the intake manifold gasket and the intake manifold itself as well.

    Seal the intake manifold gasket properly during replacement.

    To strengthen the seals on your intake manifold, don't forget to put some silicone gasket sealant around the water passages of the engine block and along the openings of the intake manifold.