Hyundai Tucson Splash Shield
Top Hyundai Tucson Splash Shield Issues and Their Causes
Splash shields, also known as mud flaps or splash guards, are attached to your Hyundai Tucson to protect its paint and parts from water, mud, and other road debris. These splash guards come in different shapes and sizes depending on where they are meant to be attached. Some splash shields are for the engine block, while others are meant to shield the brake assembly and the wheel wells. Although these protective accessories effectively defend your Hyundai Tucson's undercarriage, they are not capable of completely protecting themselves from wear and deterioration. Here are some of the most common signs of Hyundai Tucson splash shield problems and the reasons behind them:
Splash shields are attached to your Hyundai Tucson through mounting brackets and bolts. Probably due to road bumps and other factors, these screws tend to get loose after some time. When these bolts loosen and fall off the assembly, the splash shields start to move freely under the vehicle. Their non-stop flapping produces an annoying, rattling noise, which can be very distracting and embarrassing for the driver. If you are having this problem, you can just tighten the screws to stop the splash shields' noise-producing movements. But if the mounting bolts are lost or are already damaged, you need to replace them with new ones. Replacement screws for the splash shields are very cheap, and they can be bought in any car accessories store or in your local hardware store.
Rust and corrosion
Rust accumulation and corrosion is actually normal for your Hyundai Tucson splash shields, especially for those that are made from metal. The reason behind this is actually very obvious-they are subjected to very harsh environments, which involve varying temperatures, flying road debris, and splashing water and/or mud. The bad news is that all these factors are known to promote rust buildup and speed up corrosion, and the irony is that your splash shields cannot shield themselves from these corrosive elements. The only thing you can do about this is to clean them as often as you can and apply some rust-prevention chemicals on their surface. If your flaps or shields are already infested with rust, try to clean them using a commercial rust remover.
The location of the splash shields is not really maintenance-friendly. This is actually the primary reason why they are very much susceptible to acquiring scratches, cracks, and dents. Since your Hyundai Tucson splash shields are meant to protect your vehicle's most essential components, any damage on these protective accessories makes them less capable of performing their task. So if your splash shields already have huge cracks and dents, it is advisable to replace them with new ones as soon as possible.