Jeep Wrangler Headlight Assembly
Easy Solutions to Common Jeep Wrangler Headlight Assembly Problems
Picture yourself driving at night, but your headlights are not working. What will you do? Of course, your normal solution will be to purchase replacement headlight assemblies. However, even though these assemblies are made to last for a long time, they will still cause troubles due to constant use. Check out the list below for some of the common issues that you may encounter with your Jeep Wrangler headlight assembly.
Burned-out headlight bulbs
One problem that you may encounter with your Jeep Wrangler headlight assembly is having burned-out bulbs. Usually, this happens because of constant use. If this is the case, you need to purchase new bulbs, so you can replace the faulty bulbs. However, make sure that the bulbs you are going to buy are designed to fit your vehicle. What's more, if you are going to do the repair yourself, remember that you should not touch the adjusting screws because you may put the headlights out of alignment.
Hazy headlight lenses
Due to age and dirt build up, the lenses of your vehicle's headlights will eventually become hazy. As a result, the headlights will not shine as bright as before, and you will not be able to see well especially at night. To solve this problem, you may need to purchase new headlight lenses. However, if you don't want to spend a lot, then you can use white toothpaste, a carburetor cleaner, and WD-40 to polish the lenses. Just make sure that you will work in a well-ventilated area especially when using a carburetor cleaner.
Even if you don't intend to, the headlights of your Jeep Wrangler may become skewed because of loose screws and other factors. If this is the case, you need to adjust the headlights to avoid blinding other drivers and getting into accidents. You can do this by parking your car somewhere level and near a wall or door. If the light beams are crossed or misaligned, then you can use a screwdriver to turn the headlights' adjusting screws. However, just make sure that you will do this at night, so you can see the glow of the headlights properly.