Kia Sportage Sway Bar Bushing: Simple Solutions to Common Issues
One of the most important components of your Kia Sportage's suspension system is the sway bar bushing. Typically made from high-quality rubber or polyurethane, this bushing helps in maintaining precise handling by supporting the sway bar. Unfortunately, due to constant use, it eventually gets worn out. Once this happens, your Sportage will experience various problems. Listed below are some of the common issues that you may encounter with a faulty sway bar bushing:
One problem that you may encounter with your Kia Sportage sway bar bushing is hearing rattling noises. Usually, because of wear and tear, this bushing is no longer able to support the sway bar link. As a result, the link causes metallic rattling noises especially when you drive over bumps and potholes. If this is the case, you need to replace the worn out bushing immediately to avoid handling problems. To do this, you need a replacement bushing, ratchet, socket, and wrench. However, make sure that the replacement bushing you are going to purchase is made of high-quality materials and made to fit your vehicle's make and model.
Aside from rattling noises, you may also hear squeaks once your sway bar bushings are worn out. To solve this problem, you need to lubricate the bushings with an all-purpose silicone lubricant that can be purchased from most auto parts stores. However, if your Sportage's bushings are OEM or made of rubber, then you should just replace them because lubricating them will only cause more damage. Also, if you do not want to purchase silicone grease, then you can use Teflon tape instead.
If you are having difficulties with your Kia Sportage's handling, then you better check the sway bar bushings for damages. Located under your vehicle, these bushings are important components of the suspension system because they help hold the sway bar in place. Once they become damaged or worn out, they will cause the bar to move a lot, therefore causing handling problems. As a solution, you need to replace the worn bushings with new ones. Just make sure that you will consult a workshop manual to determine which bushings will suit your vehicle.