Need Assistance? Live Chat

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Land Rover Discovery Seat Belt

Reasons for Your Land Rover Discovery Seat Belt Malfunction

Before revving up your engine and driving through the roughest terrain, make sure you buckle up for safety inside your Land Rover Discovery. You just never know when accidents would happen, and somehow there is a bit of relief when you find yourself strapped with a seat belt in such unfortunate situation. It can't be denied that having a trusty seat belt has saved many lives. However, seat belts are far from being perfect despite being one of the best safety features in automobiles. Here are some of the common causes of your Land Rover Discovery seat belt malfunction:

Defective latching

To determine if you have a faulty latching system, you can test your seat belt for pressure. If it pulls free when you apply five pounds of pressure or less, you have an unreliable latching system. You need to repair the defective component of this mechanism or replace the whole unit. Failure to do so could lead to serious trouble later on. At first, you may hear the buckle click, and the latch may look fine. However, when a certain amount of force is impacted through it, the buckle suddenly comes off. Next thing you know, you're thrown off from your seat.

Faulty retractor

You would know that you have a faulty retractor when you try to unfasten your seat belt but the excess belt just won't pull in. In this case, you need to replace the retractor immediately. When replacing this component, make sure that the retractor bolt hole is perfectly aligned to the mounting bracket.

Contamination

If you find it difficult to pull out your seat belt, then it is most likely stuck. A stuck seat belt may be caused by a damaged mechanical part in the seat belt assembly. However, it can also malfunction due to contamination in one or more of its components. Check the latching system most especially for accumulated dirt, which you may clean with soapy water. Make sure you let it dry completely before reinstalling it. Test your seat belt if it no longer gets stuck. If it still does, consider getting a replacement as soon as possible.

  • Keeping Your Land Rover Discovery Seat Belt Safe and Functional 27 February 2013

    Safety should always be your number one priority, which is why aside from your brakes, you should make it a point to frequently check your seat belt as well. This simple habit will surely take you a long way. Pray it won't happen, but in the rush of an accident, a seat belt may be everything you've got to save your life. That's why it should be strong enough to go against any pressure-it must be reliable and efficient. After all, your life could seriously depend on it. And with an SUV like the Land Rover Discovery, it would help a lot to have a functional seat belt to make you feel comfortable and secure in your off-road adventures. Here are tips on how to keep your Land Rover Discovery seat belt in good condition:


    Know the proper way of cleaning your seat belt.

    Don't just clean your seat belt regularly. Make sure that you're doing it the right way, too. When cleaning your Land Rover Discovery seat belt, you need to fully extend it so that you can be sure that every inch would be given proper attention. And while you're at it, inspect the webbing for tear, wear, or any damage as well. You would have to replace the whole seat belt assembly if the webbing is damaged in any way.


    Use mild, non-detergent soap and warm water as your cleaning solution. However, be careful not to let water or any substance get inside the seat belt mechanism. Over time, it may cause problems in the mechanism, which will prevent your seat belt from properly functioning. Allow your seat belt to dry after cleaning it.


    Inspect the mechanical parts.

    Your seat belt is composed of various mechanical parts such as the buckle, tongue, anchors, rings, and mounts. Examine these parts for corrosion, cracks, deformation, or any irregularity. Repair or replace any broken component.


    Check the retracting mechanism.

    Test the retracting mechanism if it is working. You can easily do so by abruptly pulling out the webbing. Then, observe if the belt would lock and freely retract the moment it is released. If it doesn't, repairing or replacing this mechanism would be necessary.