Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Plymouth Sundance Bumper

Indicators of a Faulty Plymouth Sundance Bumper

The bumpers equipped on your Plymouth Sundance are built to withstand low-speed collisions and prevent or at least reduce damage to the vehicle. Since they are most likely the first to take in damage in the event of a car crash, you will find several sorts of defects, which may include corrosion and dings. If you think your Plymouth's bumpers fall short of your desired bumper durability, then you had better perform some troubleshooting. Listed below are just some of the common culprits behind a defective Plymouth Sundance bumper and the reasons behind them.

Corrosion and rust formation

Since most car bumpers are made of steel, they are also easily prone to rusting and corrosion. This is a common occurrence among car owners who constantly wash the bumper parts but fail to allot time for wiping, rinsing, and drying. Once you detect signs and hints of rust spots on the bumpers, better prepare your cleaning gear. DIY experts have found effective alternatives to wire brushes and rust dissolvers. You may simply use household tools like a large piece of crumpled aluminum foil as a wire brush and a small amount of soda as a rust dissolver.

Bent or dented bumpers

Dents and bends are common forms of damage found on a metal bumper. This is because the part is usually the first to get hit in the event of a collision. Greatly deformed bumpers should be replaced right away, but if the damage is not that severe, you may simply use a hammer to bend the parts back in to shape. Just make sure that the tool is wrapped in a soft cloth to prevent further problems.

Small scratches or dings

Since car bumpers are located at an accident-prone spot, it is likely that they will suffer from scratches and dings. Fortunately, even if they are prone to damage, the bumper defects are easy to detect. If you find signs of small scratches or dings, you may want to use a fine grit sandpaper to sand the damaged area. Afterwards, paint the affected area and let it dry between layers until it is filled in.

  • Ways to Keep Your Plymouth Sundance Bumper in Good Shape

    Primarily engineered to absorb and prevent damage to the front and rear ends of your Plymouth Sundance, the car bumpers are built tough and durable for a longer service life. However, even if these bumper parts are constantly maintained, there will come a time when you will have to replace them. So if you want to keep the bumpers in their optimum condition, don't forget to perform regular checkup and to do the necessary repairs. Listed here are some tips you can follow to keep your Plymouth Sundance bumpers in their top shape:

    Remove rust from the bumpers.

    Rust damage from the car bumpers can easily be removed with rust dissolvers. This cleaning solution should be available in most auto supply stores. However, if you are on a tight budget and you would like a cheaper but effective alternative for the dissolver, then look around your home for an aluminum foil and soda. You see, a crumpled piece of foil is a great substitute for a wire brush while a small amount of soda works as efficient as a rust dissolver.

    Repair dented bumpers.

    Dented bumpers are not only ugly looking, but they're also potentially dangerous. These damaged bumpers are no longer as durable as they used to be, so if you have the budget, you'd better replace them right away. It's a good thing that minor dents can still be addressed. You may just use a hammer to fix the part back to its original shape. Just keep in mind that the hammer should be wrapped around a soft cloth to avoid damaging nearby parts. Also, always aim for accuracy when hitting the dented part.

    Repaint fading bumper paint.

    Constant exposure to sunlight may cause the bumper's paint to fade over time. When this happens, you will have to repaint the part to keep it looking well and good. Before applying the paint, make sure that you first wipe off dirt and grime from the bumper. Once done, apply at least three coats of paint while sanding out any drips. Make sure that you perform the painting procedure in a well-ventilated area to avoid inhaling toxic fumes. Additionally, the newly painted bumper should be left to dry overnight before screwing it back in to place.