Plymouth Sundance Mirror
Causes behind a Faulty Plymouth Sundance Mirror
Your Plymouth Sundance's mirrors are an important safety feature of your auto. Without them, you will be unable to tell if there are cars or people behind you. This can be dangerous and can even lead to an accident. Even if the mirrors are constantly maintained, they may still show signs of aging and may soon compromise safety. So, if you are unsure of your car mirrors' condition, then you had better perform some troubleshooting. Here are some of the common problems encountered with Plymouth Sundance mirrors and the reasons behind them.
When water or moisture has crept inside the car mirrors, you will often find hardened water spots on the glass' surface. These spots are usually a result of driving through sprinklers or from improper maintenance during washing and cleaning. It' a good thing that removing the cloudiness is not that complicated. In fact, you may only use cleaning tools that are already available at home. Simply mix a solution of two parts vinegar and one part water on the hardened spots. Then, let the solution sit for around five minutes. Once done, wipe the cloudy area with a soft rag or paper towel. If the hardened spots are still there, try using a solution of vinegar and baking soda and repeat the same wiping procedure.
Minor scratches are not that big a deal, but when they are left unaddressed, they might develop into larger cracks. Luckily, you would not need to spend money for repair because some of the most effective cleaning compounds are already found at your own home. To do your own remedy at home, clean the mirror glasses with a mixture of ammonia and water first. This should be an effective substitute to the more expensive glass cleaner. Once finished, simply apply ordinary white toothpaste on the affected area and buff it lightly. Be careful with buffiing since too much pressure can weaken the glass.
Impact may cause your mirrors to pop out of their cases or become loose. When this happens, you have no choice but to check your component. To find out if you already need a replacement mirror, inspect the claw-like parts at the bottom of the mirror. The back of the mirrors should have a hook portion. If it's missing these parts, then you'd better find a new mirror right away.