Shop Volkswagen Cabriolet Flywheel

Volkswagen Cabriolet Flywheel: Issues and Easy Solutions

If there is one part that your Volkswagen Cabriolet can't function without, then it's the flywheel. Made from high-grade and heat-resistant materials, this part is used to store rotational energy and to connect the engine to the transmission. Unfortunately, due to constant use and other factors, the flywheel of your vehicle will eventually fail. Once this happens, you will experience problems that may be very difficult to solve especially if you're not fond of DIY projects. Listed below are some of these common problems and tips on how you can solve them.

Grinding noise

One problem that you may face with your Volkswagen Cabriolet flywheel is hearing a grinding noise while in motion. Usually, this noise is caused by a worn flywheel that makes contact with various car parts. To solve this problem, you must first check whether the flywheel is cracked or not. If it is cracked, then you must replace it immediately. However, if it isn't, you can have it resurfaced. This process involves running the flywheel through a machine to make it smooth again.

Engine vibrations

If your vehicle is vibrating too much whenever you take it out for a drive, then you'd better check the flywheel for signs of damage. Normally, a flywheel is attached to the crankshaft to minimize engine vibrations that can be caused by the pistons. However, because of constant use, the flywheel eventually becomes loose, therefore making your Cabriolet vibrate too much. If this is the case, you must tighten the part immediately to avoid problems in the transmission and motor mounts. You can also try replacing the flywheel at home. Just make sure that you have the right tools to avoid damaging other parts.

Gear shifting difficulties

Another problem that you may encounter with your flywheel is having gear shifting difficulties. Also called gear slippage, you'll know that you are experiencing this problem if your vehicle shifts back or does not chage gears. As a solution, you must replace the flywheel to stop it from causing too much friction and plate grinding. However, make sure that the replacement you are going to install is designed to fit your vehicle's make and model.