Browse by Part (optional)
No matches to display.
Answer Question
replaced an output speed sensor on 06 sonata 3.3 after finding harness chewed up i have continuity at ground an 12
11.8 volt at pin connector and ground is good the cent pin of 3 i assume is signal voltage of output sensor. when replaced the output sensor drove about 30 seconds it shift from low to 3rd gear then light on and stayed in 3rd gear same as before i replaced the output sensor with code p0722. Should i be getting a signal from center pin of .5-1 volt a/c or what else could be my problem?
