Where Is the Radiator Cap Located?

Reviewed by

Richard McCuistian, ASE Certified Master Automobile Technician

Technical Reviewer at CarParts.com

Written by CarParts.com Research Team - Updated on January 18th, 2024

Reading Time: 3 minutes
Summary
  • Usually made of metal or plastic, the radiator cap seals the top of the radiator filler neck to prevent coolant loss while pressurizing the cooling system.
  • To find the radiator cap, you usually have to find the radiator first. On most vehicles, you can typically find the radiator next to the engine near the front of the vehicle.
  • Accessing the radiator cap while your engine is still warm is dangerous, especially because your coolant is most likely above the boiling point of water. Be sure to turn off your engine and let it cool for a while before accessing the radiator cap.

Q: Where Is the Radiator Cap Typically Located?

A: To find the radiator cap, you usually have to find the radiator first. On most vehicles, you can typically find the radiator next to the engine near the front of the vehicle. However, some vehicles will have a front-mounted radiator but a remote fill location that can vary depending on the vehicle’s year, make, and model.

Pro Tips are nuggets of information direct from ASE-certified automobile technicians working with CarParts.com, which may include unique, personal insights based on their years of experience working in the automotive industry. These can help you make more informed decisions about your car.

Pro Tip: More typically on today’s vehicles, the fill point won’t be on the radiator itself, but will be on a surge tank mounted slightly higher than the radiator, and the cap will be heavy plastic with an internal valve. That being said, some vehicles will have a surge tank with a cap and a small radiator cap on a fill point on the radiator itself.

This is a coolant reservoir. This type won’t have a screw-on cap because it’s not designed to hold pressure. The coolant enters this bottle as it expands and then returns to the radiator as the engine cools and the radiator cap valve opens. | Image Source: Richard McCuistian
This is a surge tank or “degas” tank. This type will be designed to hold pressure and will have a screw-on pressure cap and is typically the fill point for the cooling system. | Image Source: Richard McCuistian
Radiator cap and fill point | Image Source: Richard McCuistian

On 2003-2008 Toyota Corolla models, you can find the radiator cap on top of the radiator, which is under the hood on the passenger side of the engine. Older models of the Mini Cooper also have a radiator cap on top of the radiator, but later models typically only have a coolant reservoir cap. You might not find a radiator cap on some Ford Focus models either, as some of them only have coolant reservoir caps.

The radiator cap is an important part of any vehicle’s radiator system. Usually made of metal or plastic, it’s a cap that seals the top of the radiator filler neck to prevent coolant loss while pressurizing the cooling system.

Tips on How to Access the Radiator Cap

Caution: Never remove the coolant fill cap on a hot engine. Being doused with boiling coolant causes 3rd degree burns.

Before everything else, be sure to turn off your engine and let it cool for a while. Accessing the radiator cap while your engine is still warm is dangerous, especially because your coolant is most likely above the boiling point of water.

If you open the radiator cap while your engine is still warm, coolant can suddenly spill out and burn your hands. For extra protection, you can wrap a rag over the cap or wear gloves to protect your fingers.

Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication.