Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Dodge Grand Caravan Tail Light Assembly

The Common Culprits of Faulty Volvo 850 Corner Lights

The corner lights of your Volvo 850 illuminate the areas on the sides of your car so you could see the road clearer, and you can maneuver your car better. In spite of that, the corner lights are prone to dirt and grime; and through constant use, they will eventually show signs of malfunction. If you already notice that the corner lights of you vehicle is starting to become problematic, you should perform some troubleshooting. Read on to know some of the common problems you could probably encounter.

Malfunctioning corner lights

When your Volvo 850 corner lights are malfunctioning, what you need to do is to check their voltage using a multimeter. If the lights are in good condition, the multimeter should read 12 volts. Otherwise, the bulbs of the corner lights are already busted and you need to replace them immediately. However, if you saw the reading go up to 12 volts, but there was no light from the bulbs when you switched them from the car's dashboard, then the wires or connectors may be loose or disconnected. You have to reattach the wires firmly before you switch on the corner lights again.

Discolored corner light

Through time, the corner lights of your car will turn yellow because of aging. Aside from that, scratches and dirt that have built up on the surface of the corner lights leave the lights looking dull and unattractive. You can try and polish them using a microfiber cloth and a polishing compound if the discoloration is not severe. However, if the corner light has totally turned dark and yellow, then you might need to sand the corner lights already. Just remember not to use heavy sandpaper because it may cause deep scratches instead of removing them.

Corner light not bright enough

If you notice that your car's corner light is not bright enough, you have to take a closer look at it because dirt on its surface or condensation inside may have caused the light to dim. To check if it's dirt that's caused it, you can simply wipe the light's surface and see if it brightens up. You can also check if there's condensation inside the lights by simply looking for signs of moisture. However, if none of those two worked, then you need to test the bulb if it's starting to wear down and might need a replacement soon.

  • Ways To Keep Your Dodge Grand Caravan Tail Light Assembly In Good Condition

    If the tail light assembly of your Dodge Grand Caravan is in top condition, your safety and visibility on the road is guaranteed. It is one of the components in your car that must be kept in good condition because a damaged tail light assembly will not only result to a ticket, it might also increase the risk of injuries and accidents. Unfortunately, harsh elements such as road debris and dirt will damage your car's tail light assembly overtime and this cannot be completely avoided. However there are a few things you can do to prevent your tail light assembly from getting worn out fast.

    Keep the tail light assembly free from moisture.

    The overall performance of your Dodge Grand Caravan's tail light assembly can be negatively affected by the amount of moisture that has formed inside the tail lights overtime. The illumination of your tail lights will be impaired and this will result to poor visibility on the road. Aside from poor illumination, moisture inside the tail lights can also result to a short circuit which can be dangerous when you are driving at night.

    Remove the scratches on the tail lights.

    The surface of your tail light lens can get a lot of beating from the road debris that you encounter every day. The rocks, pebbles, mud, and sticks on the road can cause deep gouges and scratches on the lens. Cleaning the lights regularly will help you get rid of these scratches that can impair your tail light's illumination and your car's visibility. Make it a habit to wash the tail light lens from the inside to the outside with soap and water. Use a scraper or a razor blade to remove all the gasket material that got stuck on the contact surface. You can also use sand paper to get rid of the scratches by rubbing it against the surface in a circular motion. Finish cleaning the lens with a water-resistant car wax and a plastic polish that will serve as a final coat that will add protection.

    Always keep the lens sealed tight.

    To prevent moisture from getting inside the tail lights, make sure that the lens cover is properly sealed. Even a small droplet of condensation passes through a poorly sealed lens cover can cause a great deal of damage to your Dodge Grand Caravan's tail light assembly. Dust and dirt can also enter the tail lights and result to even bigger problems. That is why it's important to make sure that the lights are tightly sealed to prevent water and other particles from getting inside your tail lights. Plug the areas where the leaks occur and wrap the headlight bulb sockets' outer rings with a Teflon tape or a plumber's tape.