Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Jeep Wrangler JK Bumper Cover

Top Secrets to Having a Flawless Jeep Wrangler JK Bumper Cover

To keep the stylish look and feel of your vehicle, you need to make sure that your Jeep Wrangler JK bumper cover is in excellent condition. The bumper cover complements the overall style of your ride; to keep it in mint condition, you need to follow these care and maintenance tips:

  • Use an aftermarket bumper cover protectant.

Keeping your Jeep's bumper cover clean is key to prolonging its lifespan. Likewise, protecting and polishing it regularly keeps it away from damage caused by wear and tear. If you have tried using a protectant before, you'll be fully aware that these aftermarket products do well in shielding the component against harmful contaminants like dirt and grime. Be sure that you read the product label to double check if the solution is safe to use in your vehicle. Choose one that has no toxic chemicals that can potentially damage your bumper cover. If you are not sure which one to use, ask your trusted mechanic for advice.

  • Eliminate both minor and deep ones cratches.

With minor scratches, restoring the shiny surface of your bumper cover is relatively simple. But with deep scratches, you may need to consult with an expert mechanic if the cover is still good for repair or replacement would be better. A small scratch or a series of light scratches can be considered as minor scratches. These can be fixed without the need to sand the affected area. With only a buffer and a buffing compound, these small scratches can be erased almost immediately.

  • Bring back the dented cover's shape with hot water.

Having dents on the bumper cover can make your vehicle look nasty. This is why some drivers would even spend so much just to remove these dents and restore the bumper cover's pristine appearance. However, there are more cost-efficient ways to recover your bumper's original shape. One quick way to remove the dents is to pour hot water over the dent. All you have to do is to reach underneath the wheel well and push it to pop out the dent. This trick works well thanks to science, which states that the heat from the boiling water allows the cover's plastic to expand and be flexible. With its new elasticity, you can now pop the cover back to its initial shape. Remember to pour cold water over the fixed dents to let it shrink back into place.

Jeep Wrangler JK Bumper Cover Bestsellers View more

  • Simple Tips When Installing a Jeep Wrangler JK Bumper Cover

    Aside from providing protection, your car's bumper cover also serves as an asset in terms of making your vehicle look appealing. In fact, a simple change in your Jeep Wrangler JK bumper cover can already impove the appearance of your vehicle. So to keep your Jeep's classy look and feel, simply follow these tips in caring for your bumper cover:

    Tip #1: Cleane the bumper to remove dirt and debris.

    For a successful bumper cover installation, make sure that you clean the car's front part, especially the area where the cover will be attached. Doing this ensures that you achieve seamless connections between the cover and the vehicle's front frame. In addition, a dirt-free bumper allows you to install the bolts through each hole effortlessly. The new bumper cover may come with unwanted contaminants that you need to remove first. There can also be rough surfaces and tiny bumps, which can be removed by sanding the cover. Use a 600-grit sandpaper to smoothen the cover's surface, and polish it off with some wax.

    Tip #2: Two pairs of hands are better than one.

    Though some drivers can manage it on their own, it helps to do the installation with an assistant—be it a friend or a mechanic. You can ask one of your friends to help you in holding up the cover, while you align it on the vehicle. With the aid of your assistant, your hands are now free to line up the holes in the bumper cover with the vehicle's mounting holes. When you have fully secured the bolts, you may want to hand-tighten the nuts just to make sure they don't fall off. Then, you can tell your assistant to release the bumper.

    Tip #3: Inspect the bumper cover for final touches.

    Stand in front of your car and step backward a few inches to examine the bumper cover. Check the alignment to see if the cover is aligned properly. If not, then perform minor adjustments by referring to your owner's manual. Always check the bumper cover before leaving the garage, as this component can serve as your protection in the event of front-end collisions. Make sure that they are properly installed and are in good condition before going for a ride.