Need Assistance? (Se Habla Espanol) Call or Chat Online

Select by Category

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Toyota Tundra Sway Bar

Usual Causes of Problems with a Toyota Tundra Sway Bar

There are many parts of a vehicle that work in tandem in order to provide stability. Of all these parts, the sway bar stands out as a key part in making a car's drive truly quiet. More importantly, it provides resistance to rolling when the car starts to move. However, if the car's sway bar breaks down, there are a number of problems that it can cause. Such problems are discussed below:

Bending corners

A car's ability to turn corners can prove crucial to avoiding oncoming traffic or accidents. If a sway bar link has problems, it will usually show itself while driving, especially when turning. Try to turn into corners at a burst of speed, but with care. Feel the car, with emphasis on noticing the reaction of the steering and the chassis. If it feels a bit darty and stability is vague at best, then you might have a broken drop link in your sway bar or worn bushing.


Toyota Tundra owners should be on the lookout for this type of problem which seemed to plague the 2002 series of the line. The front driver's side sway bar of the car tends to have a huge problem with corrosion. The danger of this is that you might meet with an accident while driving, discovering too late that your ling had broken. Corrosion does not sit well with the Tundra, since it is a potential hazard which could cause harm if something actually falls off or breaks due to the condition of the frame.

Rough Pavements

Rough roads and uneven surfaces often cause a problem for the sway bar. When driven on rough, bumpy terrain, they tend to give off one-wheel bumps to the opposite wheel. This causes jarring and waddling motions which can increase the stiffness of the roll every time it is driven on rough surfaces. This can also make the car suffer from rattle vibration and continuous clunking effects coming from the front end of the vehicle.

Other problems

Any of the problems above may result to a lot of things for an unlucky you. If this persists, you may find that your front wheels may become unbalanced. An unbalanced wheel tends to make steering difficult and this makes the vehicle require a tune-up, and eventually, a complete overhaul.

Toyota Tundra Sway Bar Bestsellers View more

Toyota Tundra Sway Bar Available Years

  • Keeping your Toyota Tundra Sway Bar in Good Condition

    Keeping your car stable and solid during a leisurely weekend drive is the main purpose of a sway bar. A sway bar helps a car to avoid rolling off-course and moving uncontrollably during a drive on the free way. Bad sway bars usually give bad results to a car, the worst of these being accidents. Learn how to keep your sway bars working for you by reading these following tips:

    Grease it up

    There are times when a bad sway bar gives off a distracting, squeaking sound that can serve also as a warning that it is going bad. Sway bars are also susceptible to a lot of factors like different weather and road conditions, and corrosion can leave a sway bar giving off funky sounds such as these. In order to avoid these, regularly check your sway bar for any signs of corrosion. Clean them if they do seem to be so, and re-grease them with silicone grease in order to keep corrosion off of them.

    Keep to the corners

    A sway bar's greatest enemy would be corners. Sway bars help a car to keep level when turning corners, thus providing more control. Have the mind to drive properly and avoid excessive leaning or cutting corners when turning. This will help to keep pressure and stress of your sway bar. It will also help to keep your sway bar from breaking due to the stress caused by this.

    Pay attention to the clunking sounds

    It's not really that hard to miss. When driving, your car may develop audible 'clunk' or 'clink' sounds every time you drive past a hump on the road or a bump. This is due to a broken sway bar link. In this case, if you hear a 'clunk' or 'clink' sound the first time, it may be advisable to bring in your car for an inspection.

    Visual aspects

    The best way to determine a weak or broken sway bar, perhaps, is to see it for yourself. It can either be done by a mechanic, or you can do it yourself, in the comfort of your home. Checking on the sway bar will give you a heads up on its condition. It will also give you an idea whether you need to have your sway bar changed already, or if it is still good enough to keep.