How to replace the turn signal switch 2007 – 2013 Chevrolet Silverado 2

Chapter 1:

Remove the plastic trims

Step 1/5

Lower the steering wheel to remove the adjustment handle.

Chapter 1:

Step 2/5

Using a flathead screwdriver, pry it out of its slot.

Chapter 1:

Step 3/5

Use a flat head screwdriver to pry on the upper plastic trim so that it can be unclipped from the side of the turn signal switch. You can also use a car trim removal tool to help you.

Chapter 1:

Step 4/5

Still using the same too, remove the cover from the gear shift lever. Then unclip the plastic trim on the gear shift lever side.

Chapter 1:

Step 5/5

You can now remove the plastic trims.

Chapter 2:

Remove the turn signal switch

Step 1/4

Using a ratchet and a Torx T25 socket, unscrew the first switch retaining screw.

Chapter 2:

Step 2/4

Turn the steering wheel to access the second screw.

Chapter 2:

Step 3/4

You can unscrew it with a T25 Torx wrench. Then move the switch aside.

Chapter 2:

Step 4/4

Using the flat head screwdriver, lift the tabs holding the connectors in place. You can now remove the turn signal switch.

Chapter 3:

Put the turn signal switch back

Step 1/2

Take the new turn signal switch and plug it in.

Chapter 3:

Step 2/2

Put it back in its place. Then screw the 2 retaining screws back in.

Chapter 4:

Put the plastic trims back

Step 1/5

Put the lower trim back in place.

Chapter 4:

Step 2/5

Put the cover back on the gear shift lever.

Chapter 4:

Step 3/5

Put the upper trim back in place.

Chapter 4:

Step 4/5

Put the adjustment handle back in place.

Chapter 4:

Step 5/5

Operation complete.