How to replace the windshield wipers blades 2007 – 2013 Chevrolet Silverado 2
To replace the windshield wipers blades on your Silverado 2 this tutorial was tailor-made for you. You will be asked to remove the windshield wiper blade, tips, install the new blade as well as carry out a few other steps. You can carry out this tutorial of 4 chapters in 10 minutes. Bring your car trim removal tool and your paper towels and let’s get started!
Duration
10 minutes
Number of steps
4
Difficulty out of 5
1
Average savings
$15
Parts You Will Need
Tools You Will Need
Step-by-Step Installation
Chapter 1:
Remove the windshield wiper blade
Step 1/2
Lift the wiper blade arm up until it’s locked in the upper position.
Chapter 1:
Step 2/2
To remove the blade, lift the locking flap using a car trim removal tool, Then, slide the blade down to remove it.
Chapter 2:
Tips
Step 1/1
To avoid any accidents, place the arm delicately onto the windshield. Before doing so, place a folded piece of paper towel on the windshield to protect it.
Chapter 3:
Set up
Step 1/2
Take the new blade.
Chapter 3:
Step 2/2
Install the adapter suited to your assembly if it is not already in place on the blade.
Chapter 4:
Install the new blade
Step 1/3
To put the new one in place, slide the blade into place, then fold down the locking flap.
Chapter 4:
Step 2/3
Place the arm back down gently.
Chapter 4:
Step 3/3
Operation complete.
